Page 511 / 998 Scroll up to view Page 506 - 510
DHCP Server command reference
Dynamic Host Configuration Protocol
5-51
iMG/RG Software Reference Manual (System Administration)
Example
--> dhcpserver list options
See also
DHCPSERVER SUBNET ADD OPTION
For info DHCPSERVER SET ALLOWUNKNOWNCLIENTS
Syntax
DHCPSERVER SET ALLOWUNKNOWNCLIENTS {ENABLED|DISABLED}
Description
This command enables/disables the dynamic assignment of addresses to unknown clients.
subnet-mask
time-offset
routers
time-servers
ien116-name-servers
domain-name-servers
log-servers
cookie-servers
lpr-servers
impress-servers
resource-location-servers
host-name
boot-size
merit-dump
domain-name
swap-server
root-path
extensions-path
ip-forwarding
non-local-source-routing
policy-filter
max-dgram-reassembly
default-ip-ttl
path-mtu-aging-timeout
path-mtu-plateau-table
interface-mtu
all-subnets-local
broadcast-address
perform-mask-discovery
mask-supplier
router-discovery
router-solicitation-address
static-routes
trailer-encapsulation
arp-cache-timeout
ieee802-3-encapsulation
default-tcp-ttl
tcp-keepalive-interval
tcp-keepalive-garbage
nis-domain
nis-servers
ntp-servers
vendor-encapsulated-options
netbios-name-servers
netbios-dd-server
netbios-node-type
netbios-scope
font-servers
x-display-manager
dhcp-requested-address
dhcp-lease-time
dhcp-option-overload
dhcp-message-type
dhcp-server-identifier
dhcp-parameter-request-list
dhcp-message
dhcp-max-message-size
dhcp-renewal-time
dhcp-rebinding-time
dhcp-class-identifier
dhcp-client-identifier
option-62
option-63
nisplus-domain
nisplus-servers
tftp-server-name
bootfile-name
mobile-ip-home-agent
smtp-server
pop-server
nntp-server
www-server
finger-server
irc-server
streettalk-server
streettalk-directory-assis-
tance-server
user-class
option-78
option-79
option-80
option-81
option-82
option-83
option-84
nds-servers
nds-tree-name
nds-context
option-88
option-89
option-115
auto-configure
option-117
option-254
option-end
Page 512 / 998
Dynamic Host Configuration Protocol
DHCP Server command reference
iMG/RG Software Reference Manual (System Administration)
5-52
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> dhcpserver set allowunknownclients disabled
See also
DHCPCLIENT SET INTERFACECONFIG CLIENTID
5.1.5.1.79 DHCPSERVER LIST HOST
Syntax
DHCPSERVER LIST HOSTS
Description
This command lists the hosts assigned from the server.
Example
--> dhcpserver list hosts
5.1.5.1.80 DHCPSERVER SET ALLOWUNKNOWNCLIENTS
Syntax
DHCPSERVER SET ALLOWUNKNOWNCLIENTS {ENABLED|DISABLED}
Description
This command enables/disables the dynamic assignment of addresses to unknown clients.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> dhcpserver set allowunknownclients disabled
See also
DHCPCLIENT SET INTERFACECONFIG CLIENTID
5.1.5.1.81 DHCPSERVER SET BOOTP
Syntax
DHCPSERVER SET BOOTP {ENABLED|DISABLED}
Description
This command determines whether DHCP server can respond to BOOTP requests.
Option
Description
Default Value
enabled
IP addresses are dynamically assigned to unknown clients
Enabled
disabled
IP addresses are not dynamically assigned to unknown clients
Option
Description
Default Value
enabled
IP addresses are dynamically assigned to unknown clients
Enabled
disabled
IP addresses are not dynamically assigned to unknown clients
Page 513 / 998
DHCP Server command reference
Dynamic Host Configuration Protocol
5-53
iMG/RG Software Reference Manual (System Administration)
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> dhcpserver set bootp disabled
5.1.5.1.82 DHCPSERVER SET DEFAULTLEASETIME
Syntax
DHCPSERVER SET DEFAULTLEASETIME <defaultleasetime>
Description
This command sets the global default lease time for DHCP server.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> dhcpserver set defaultleasetime 50000
See also
DHCPSERVER SET SUBNET MAXLEASETIME
5.1.5.1.83 DHCPSERVER SET MAXLEASETIME
Syntax
DHCPSERVER SET MAXLEASETIME <maxleasetime>
Description
This command sets the global maximum lease time for DHCP server.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
enabled
DHCP server responds to BOOTP queries.
Enabled
disabled
DHCP server does not respond to BOOTP queries.
Option
Description
Default Value
defaultleasetime
The default time (in seconds) assigned to a lease if
the client requesting the lease does not ask for a
specific expiry time.
43200
Page 514 / 998
Dynamic Host Configuration Protocol
DHCP Server command reference
iMG/RG Software Reference Manual (System Administration)
5-54
Example
--> dhcpserver set maxleasetime 90000
See also
DHCPSERVER SET DEFAULTLEASETIME
5.1.5.1.84 DHCPSERVER SHOW
Syntax
DHCPSERVER SHOW
Description
This command displays the following global configuration information about the DHCP
server:
Status of the server (enabled/disabled)
Global default lease time
Global maximum lease time
Bootp requests setting (enable/disable)
Allow unknown clients setting (enable/disable)
Example
--> dhcpserver show
Global DHCP Server Configuration:
Status: ENABLED
Default lease time: 43200 seconds
Max. lease time: 86400 seconds
Allow BOOTP requests: true
Allow unknown clients: true
See also
DHCPSERVER SHOW SUBNET
5.1.5.1.85 DHCPSERVER UPDATE
Syntax
DHCPSERVER UPDATE
Description
This command updates the DHCP server configuration. Changes made to the server
configuration will not take effect until this command has been entered.
Example
--> dhcpserver update
dhcpserver: Reset request acknowledged. Reset imminent.
Option
Description
Default Value
maxleasetime
The maximum time (in seconds) for a lease when
the client requesting the lease does not ask for a
specific expiry time
86400
Page 515 / 998
DHCP Client command reference
Dynamic Host Configuration Protocol
5-55
iMG/RG Software Reference Manual (System Administration)
5.1.6
DHCP Client command reference
This section describes the commands available on the AT-RG624/634 Residential Gateway to enable, configure
and manage the
DHCP Client
module.
5.1.6.1 DHCP client CLI commands
The table below lists the
DHCP client
commands provided by the CLI:
DHCP client CLI command
s
TABLE 5-2
DHCP client CLI commands
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
DHCPCLIENT ADD INTERFACECONFIG
X
X
X
X
X
X
X
X
X
DHCPCLIENT CLEAR INTERFACECONFIGS
X
X
X
X
X
X
X
X
X
DHCPCLIENT DELETE INTERFACECONFIG
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG ADD REQUESTED OPTION
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG ADD SENT OPTION
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG CLEAR SENT OPTIONS
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG CLEAR REQUESTED OPTIONS
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG DELETE REQUESTED OPTION
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG DELETE SENT OPTION
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG LIST REQUESTED OPTIONS
X
X
X
X
X
X
X
X
X
DHCPCLIENT INTERFACECONFIG LIST SENT OPTIONS
X
X
X
X
X
X
X
X
X
DHCPCLIENT LIST INTERFACECONFIGS
X
X
X
X
X
X
X
X
X
DHCPCLIENT SET BACKOFF
X
X
X
X
X
X
X
X
X
DHCPCLIENT SET INTERFACECONFIG AUTOIP ENABLED|DISABLED
X
X
X
X
X
X
X
X
X
DHCPCLIENT SET INTERFACECONFIG CLIENTID
X
X
X
X
X
X
X
X
X
DHCPCLIENT SET INTERFACECONFIG DEFAULTROUTE ENABLED|DISABLED
X
X
X
X
X
X
X
X
X

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top