A-Link RR24API Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of A-Link RR24API router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 48
Quick installation guide
Pika-asennusohje
RoadRunner 24AP(i+)
Ver.1.0
In English pages 2 - 16
Suomeksi sivut 18 - 32
På Svenska sidor 33-48
Page 2 / 48
2
Package includes:
m
-
Quick installation guide
-
Phone cable
-
Power supply
-
Network cable
onnection/explain of connectors
1.
Connect phone cable from ADSL -line to modem ADSL -port.
2.
Connect network cable from IPTV –STB to modem IPTV -port.
3.
Connect network cable from computer (network card) and VOIP -device (example. ATA) to modem
DATA/VOICE -port.
4
Reset – button, where modem can be reset back to factory defaults.
5.
Connect power supply to modem power port.
6.
Connect antenna came with modem. You can use other external WLAN –antennas also.
7.
Turn power on using this button.
requirements:
-
Place modem to horizontal and flat base
-
Keep modem away from heating devices
-
Do not keep
-
ADSL –mode
-
Antenna
C
Installation
modem in dusty or wet place
Page 3 / 48
Frontpanel led’s/functions:
ndshaking
-
ON = ADSL is connected
Ports 1 - 4:
-
OFF = WLAN is not activated
-
ON = Network connection is activated
-
Flashing = data in LAN
PPP:
-
OFF = Network connection is not activated
PWR:
ADSL:
-
ON = power on
-
OFF = no ADSL connection
-
OFF = power off
-
Flashing = ADSL ha
WL/ACT:
-
Random flash = data in ADSL line
-
ON = WLAN is activated
-
Flashing = data in WLAN
-
Flashing = connecting PPP
-
ON = PPP connected
-
OFF = no PPP connection
Start installation:
In defaults RoadRunner 24AP(i+) ADSL modem have bridged ADSL connection for IPTV use (or for other use where
ou need public IP address for device) on port 4 which is marked as
IPTV
. On ports 1, 2 and 3 marked as
ATA/VOICE
and WLAN connection have NAT and firewall in use to secure your computer Internet connection.
Easy installation will be guaranteed by modem own DHCP server, which shares automatically IP addresses to your
computers. Modify/check only your
1
our Internet connection is ready
to use.
you use modem wireless connection, is
extremely important
to add encryption to safe your wireless connection as in
step
8
”
Setting up wireless network and security
” has been told. Wireless network is not active in defaults. To take
wireless network in use, make settings as in step
2
.
If your ISP uses other VPI/VCI values than saved defaults in modem, you can make setting as in step
3
is told.
you som
e in ports 1, 2 and 3 and in WLAN connection,
you can set
must be enabled
before cha
idge.
sa
,
Sonera
,
DNA,
Telia
. Mod
re,
0/100, 0/33, 8/35, 0/32,
0/50, 0/40
Bridged c
If you have
pure bridge, you have to reset to factory defaults to configure it again.
t when you press reset button back of the modem about 10 seconds when modem has power
y
D
computer network settings as in step
is told and y
If
If
e reason do not want to use modem own NAT/Firewall featur
is told. In
modem as pure bridge as in step
4
this case your computer firewall software
nge modem to pure br
* All (RFC
bridged connections
ovided
li
1483/2684)
pr
by ISP do work in defaults, example.
E
which hunts these
VPI/VCI
values automatically:
em supports
Auto Hunt
featu
Supported browsers are Internet Explorer 5.x, Netscape 6.x or later.
Internet br
any
setting configu
owser can not have
Proxy
red.
onnection:
configured ADSL modem as
Reset to factory defaults:
Factory defaults can be rese
on.
3
Page 4 / 48
Contents:
1
.
Step
Network settings for Internet connection.
factory reset before you can access to modem settings.)
3.
Specify your ISP VPI/VCI values.
nt to use modem own NAT/Firewall feature (ports 1, 2 and 3 and WLAN))
chart (Wireless).
network and security.
(This step is for those who want to use modem own NAT/Firewall feature (Enabled in default))
Step
2
.
Activate wireless network
(You must do this step in modem first boot up or after
Step
(This step is for those who specify ISP VPI/VCI values manually)
Step
4.
Set modem to pure bridge state.
(This step is for those who do not wa
Step
5.
Set up PPP connection.
(This step is for those who Internet connection is with PPPoA or PPPoE authentication)
Step
6.
Failure analysis chart.
(If you face problems with modem, follow this chart)
Step
7.
Failure analysis
(If you face problems with modem wireless connection, follow this chart)
Step
8.
Setting up wireless
(This step advice how to take wireless connection with encryption in use)
4
Page 5 / 48
1.
Network settings for Internet connection
odify/check these settings when you want to use your computer on Internet)
You can use ports 1, 2, 3 and WLAN connection to connect your computer to Internet. Port 4 is for IPTV use, but you
can also connect any network device which needs public IP address from ISP.
Windows 2000/XP
(M
1.
Go to
Start
->
Settings
->
Network and Dial-Up Connections
2.
Move mouse over
Local Area Connection
icon and press right hand
button on mouse. Choose
Properties
3.
Choose
Internet Protocol (TCP/IP)
-> Press
Properties
4.
Choose
Obtain an IP address automatically
5.
When all necessary settings have been made, press
OK.
6.
In properties of Internet Protocol (TCP/IP), press
OK.
7.
Press
OK
in Network settings.
(If windows need to be restarted, press
Yes
)
8.
Make sure that, no
Proxy
settings is enabled in Internet Explorer settings
9.
Now your workstation is ready for Internet
indows Vista
W
.
Go to
Start
->
Network.
.
Press
Network and Sharing Center
button and then press
Manage network connections
link.
Move mouse over
Local Area Connection
icon and press right hand
button on mouse. Choose
Properties
Choose
Internet protocol version 4 (TCP/IPv4)
-> Press
Properties.
.
Make sure that, no
Proxy
settings is enabled in Internet Explorer settings
1
2
3.
4.
5.
Choose
Obtain an IP address automatically
.
6.
In properties of Internet Protocol (TCP/IP), press
OK.
7.
Press
OK
in Network settings.
8
9.
Now your workstation is ready for Internet
Mac OS
1.
Open
AppleTal
.
Open
TCP/IP -co
k -controller
, choose
Ethernet
connection
ntroller
and modify these settings:
2
Connection =
Ethernet
Definition =
DHCP-server
s ready for Internet
3.
Save settings. Now your workstation i
Linux RedHat 8.0
1.
Open
Start Here
from desktop, go to
System Settings
and
2.
In Devices, double click mouse’s left hand button o
Choose
Automatically obtain IP address settings with: DHCP
Choose
Automatically obtain DNS information from provider
3.
Press
Ok
. Now your workstation is ready for
Network.
n top of your Network adapter and modify these settings:
19216811.live