Page 91 / 156
Scroll up to view Page 86 - 90
WAN Interface
WAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
8-9
Edition 01
May 2008
Figure 8-3
ATM Setting window
The following table describes the fields of the ATM Setting window.
Table 8-3
Field descriptions
Field
Description
VPI
The virtual path identifier of the ATM
PVC.
VCI
The virtual channel identifier of the ATM
PVC.
QoS
The QoS category of the PVC; choose
among:
•
UBR
•
CBR
•
rt-VBR
•
nrt-VBR
PCR
The maximum rate at which cells can be
transported along a connection in the
ATM network.
CDVT
The amount of delay permitted between
ATM cells (expressed in microseconds).
Page 92 / 156
WAN
ADSL Settings
8-10
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
SCR
The maximum rate that traffic can pass
over a PVC without the risk of cell loss.
MBS
The maximum number of cells that can be
transmitted at the PCR.
Apply Changes
Click to save your changes.
Undo
Click to clear all fields.
Close
Click to close the window.
ADSL Settings
Click
ADSL Interface
in the WAN menu to open the ADSL Settings window. In this
window you can select the DSL modulation. In most network environments, the default
settings are acceptable. The CellPipe 7130 RG supports the following modulations:
•
G.Dmt
•
G.Lite
•
T1.413
•
ADSL2
•
ADSL2+
•
AnnexL
•
AnnexM
The CellPipe 7130 RG negotiates the modulation mode with the DSLAM.
Page 93 / 156
ADSL Settings
WAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
8-11
Edition 01
May 2008
Figure 8-4
ADSL Settings window
The following table describes the fields of the ADSL Settings window.
Table 8-4
Field descriptions
Field
Description
ADSL Modulation
Choose among:
•
G.Lite – 1.5 Mb/s downstream, 512 Kb/s
upstream
•
G.Dmt – 8 Mb/s downstream, 864 Kb/s
upstream
•
T1.413 – max 15 Mb/s downstream, max
1.5 Mb/s upstream
•
ADSL – 1.5 to 9 Mb/s downstream, 16 to
640 Kb/s upstream
•
ADSL2+ – 24 Mb/s downstream
Page 94 / 156
WAN
ADSL Settings
8-12
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
AnnexL Option
Select the check box to enable the AnnexL
option if your WAN connection uses Annex
L. Annex L extends the reach of the DSL
service, up to 5.4 km (18,000 ft).
AnnexM Option
Select the check box to enable the AnnexM
option if your WAN connection uses Annex
M. Annex M increases the upload speeds of
the connection.
ADSL Capability
Select the check boxes to enable Bitswap and
SRA.
Apply Changes
Click to save your changes.
Page 95 / 156
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
9-1
Edition 01
May 2008
9
Advance
Overview
Purpose
Click
Advance
in the CellPipe 7130 RG menu bar to open the Advance menu. This menu
contains:
•
DNS
•
Firewall
•
Virtual Server
•
Routing
•
IP QOS
•
Anti-dos
•
Port Mapping
•
Other
This menu is available only for the admin user.
Contents
This chapter covers the following topics:
DNS
9-2
Firewall
9-4
19216811.live