Page 121 / 156
Scroll up to view Page 116 - 120
Other
Advance
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
9-27
Edition 01
May 2008
Figure 9-15
Bridge Configuration window
The following table describes the fields of the Bridge Configuration window.
Table 9-12
Field descriptions
Field
Description
Aging Time
If the host is idle for 5 min (default), its
entry is deleted from the bridge table.
802.1d Spanning Tree
Enable spanning tree to provide path
redundancy while preventing
undesirable loops in your network.
Apply Changes
Click to save your changes.
Undo
Click to clear the configuration
changes in these fields.
Show MACs
Click to show a listing of the learned
MAC addresses for the bridge.
IP PassThrough
Click
IP PassThrough
in the left-hand panel to open the IP PassThrough Configuration
window. IP PassThrough is also known as ZIPB or IP Extension.
With PPP IP extension,
the public IP address is extended to the computer’s LAN interface.
Page 122 / 156
Advance
Other
9-28
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 9-16
IP PassThrough Configuration window
The following table describes the fields of the IP PassThrough Configuration window.
Table 9-13
Field descriptions
Field
Description
IP PassThrough
Select the configured PVC upon which
to enable the IP PassThrough
connection.
Lease Time
The maximum time period for IP
PassThrough.
Allow LAN access
Enables a PC within the local network
to communicate with a PC which has
already obtained the IP address from
the WAN.
Apply Changes
Click to save your changes.
Page 123 / 156
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
10-1
Edition 01
May 2008
10
Admin
Overview
Purpose
Click
Admin
in the CellPipe 7130 RG menu bar to open the Admin menu which contains:
•
Remote Access
•
Commit/Reboot
•
Password
•
Backup/Restore
•
Upgrade Firmware
•
Time Zone
•
System Log
•
SNMP
•
TR069
•
ACL
•
Logout
Contents
This chapter covers the following topics:
Remote Access
10-2
Commit/Reboot
10-4
Password
10-5
Page 124 / 156
Admin
Remote Access
10-2
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Backup/Restore
10-7
Upgrade Firmware
10-8
Time Zone
10-9
System Log
10-11
SNMP
10-12
TR069
10-13
ACL
10-16
Logout
10-18
Remote Access
Click
Remote Access
in the Admin menu to open the Remote Access window. In this
window you can enable or disable the management services that can be used by remote
hosts. For example, if the Telnet service is enabled on port 23, the remote host can access
the CellPipe 7130 RG by Telnet through port 23.
Page 125 / 156
Remote Access
Admin
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
10-3
Edition 01
May 2008
Figure 10-1
Remote Access window
The following table describes the fields of the Remote Access window.
Table 10-1
Field descriptions
Field
Description
Interface
Select the interface to which these
remote access configurations will
apply.
TELNET
Select this check box to permit Telnet
connections to the interface and specify
the port.
FTP
Select this check box to permit FTP
connections to the interface and specify
the port.
TFTP
Select this check box to permit TFTP
connections to the interface.
HTTP
Select this check box to permit HTTP
connections to the interface and specify
the port.
19216811.live