ADB P-RG_A4202N Router Manual PDF (Setup & Configuration Guide)

Page 36 / 182 Scroll up to view Page 31 - 35

PRG AV4202N

Router Configuration

OGU 930500275-A1

29

FIGURE 1.

Router’s Home Page

In the following table a list of all available network objects and related descrip-

tion is shown.

TABLE 1.

Available Network Objects

Map Symbol

Description

It represents the Internet

It represents your DSL Wide Area Network (WAN) connection.

Click this icon to configure the WAN interface

Page 37 / 182

PRG AV4202N

30

OGU 930500275-A1

Router Configuration

TABLE 1.

Available Network Objects

Map Symbol

Description

It represents your Ethernet Wide Area Network (WAN) connection

or an Ethernet Local Area Network (LAN) connection. Click this

icon to configure the WAN interface or the Ethernet LAN device

It represents the gateway's Firewall. The height of the wall corre-

sponds to the security level currently selected: Minimum, Typical or

Maximum. Click this icon to configure security settings

It

represents

a

USB

LAN

connection.

Click

this

icon

to

configure network parameters for the USB LAN device

It represents a Wireless LAN connection. Click this icon to config-

ure network parameters for the Wireless LAN device

It represents a bridge connected in the home network. Click this

icon to view the bridge's underlying devices.

It represents a computer (host) connected in the home network.

Each computer connected to the network appears below the net-

work symbol of the network through which it is connected. Click an

icon to view network information for the corresponding computer..

It represents a printer that is connected to the Router and is shared

by network users. Click the icon to view the printer's settings.

It represents a file server that is connected to the Router and is

shared by network users. Click the icon to view the file server con-

figuration.

Page 38 / 182

Installation Wizard Section

OGU 930500275-A1

31

Installation Wizard Section

Installation

Wizard Section

This chapter will describe the

Installation Wizard Section

accessible from the

Home Page

of the

PRG AV4202N

upon user authentication to the Router.

Be aware that any configuration changes could compromise your connectivity.

The

Installation Wizard

enables speedy configuration of your Internet connec-

tion.

It is a step-by-step procedure that guides you through your Internet connection

and wireless network setup, and helps you to subscribe for different services.

The wizard progress box, located at the right hand side of the screen, provides

a monitoring tool for the wizard's steps during the installation progress.

After the setup described in this chapter, you can immediately start using your

Router to:

1.

Share a broadband connection among multiple users (HTTP, FTP, Telnet,

NetMeeting) and between all of the computers connected to your home net-

work.

2.

Build a home network by connecting additional PCs and network devices to

the gateway.

3.

Share resources (file servers, printers, etc.) between computers in the home

network using their names; auto-learning DNS enables

PRG AV4202N

to

automatically detect the network identification names of the LAN PCs, ena-

bling mutual communication using names, not IP addresses.

4.

Control network parameters, including DHCP, DNS and WAN settings.

Page 39 / 182

PRG AV4202N

32

OGU 930500275-A1

Installation Wizard Section

5.

View network status, traffic statistics, system log and more.

6.

Allow access from the Internet to games and other services provided by

computers in the home network.

7.

Prohibit computers in the home network from accessing selected services on

the Internet.

8.

Block access to specific Internet Web sites from your home network.

To start the installation wizard, click

performing the steps listed in the progress box consecutively, stopping only if a

step fails or if input is required. The following sections describe the wizard steps

along with their success/failure scenarios. If a step fails, use the

Retry

or

Skip

buttons to continue.

FIGURE 1.

Installation Wizard Panel

LOG IN SETUP

Insert a user name and password, be sure to remember the log in credentials

used. Its advised to write them down in a peace of paper and store it in a safe

place.

FIGURE 2.

Log In Panel

Page 40 / 182

PRG AV4202N

Installation Wizard Section

OGU 930500275-A1

33

TEST ETHERNET LINK

The first step is a test of the Ethernet connection. This step may fail if the router

cannot detect your Ethernet link (for example, if the cable is unplugged). Verify

that your Ethernet cables are connected properly, and click

Retry

.

FIGURE 3.

Test Ethernet Link Panel

ANALYZE INTERNET

CONNECTION TYPE

The next step is an analysis of your Internet connection. This step may fail if the

router is unable to detect your Internet connection type.

After three retries, the screen provides a link to manually set the Internet con-

nection type. Click this link. The screen refreshes, displaying a connection type

combo box. To learn about manually configuring your Internet connection,

please refer to the

Quick Setup Section

of this manual.

SETUP INTERNET

CONNECTION

If your Internet connection requires login details provided by your Internet Ser-

vice Provider (ISP) (e.g when using PPPoE).

Enter your

user name

and

password

and click

TEST SERVICE PROVIDER

CONNECTION

This step tests the connectivity to your ISP.

TEST INTERNET

CONNECTION

This step tests the connectivity to the Internet.

WIRELESS SETUP

Use this step to configure a wireless network. Enter a name for your wireless

network and select its level of security. Click

Rate

Popular ADB Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share