Page 81 / 182 Scroll up to view Page 76 - 80
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
74
OGU 930500275-A1
Security Section
FIGURE 10.
Security Log panel
Time.
The time the event occurred.
Event.
There are five kinds of events:
Inbound Traffic: The event is a result of an incoming packet.
Outbound Traffic: The event is a result of outgoing packet.
Firewall Setup: Configuration message.
WBM Login: Indicates that a user has logged in to WBM.
CLI Login: Indicates that a user has logged in to CLI (via Telnet).
Event-Type.
A textual description of the event:
Blocked: The packet was blocked. The message is colored red.
Accepted: The packet was accepted. The message is colored green.
Details.
More details about the packet or the event, such as protocol, IP ad-
dresses, ports, etc.
To view or change the security log settings, click the 'Settings' button that ap-
pears at the top of the 'Firewall Log' screen. The 'Security Log Settings' screen
will appear allowing you to set the types of activities for which you would like to
have a log message generated.
Page 82 / 182
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Voice over IP Section
OGU 930500275-A1
75
Voice over IP Section
Voice over IP
Section
This chapter will describe the
Voice over IP Section
accessible from the
Home
Page
of the
PRG AV4202N
.
Be aware that any configuration changes could compromise your connectivity.
LINE SETTINGS
The Line Settings tab of the VoIP screen defines the phone ports of the Router
and allows you to configure them.
1.
Click the 'Voice Over IP' side-bar icon.
2.
Click the 'Line Settings' tab, the following screen will appear. Before starting
to make phone calls, you need to configure each line's parameters. You can
manage which telephone is operational by marking the check-box next to it.
Page 83 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
76
OGU 930500275-A1
Voice over IP Section
FIGURE 1.
Line Settings Panel
3.
Click the edit action icon of each line to configure its different parameters.
SPEED DIAL
You can assign speed dial numbers to parties you frequently call. A speed dial
entry must specify a destination which may be of one of three types: proxy, local
line or direct call.
FIGURE 2.
Speed Dial Panel
Speed Dial via Proxy.
To add a new proxy speed dial entry:
1.
Click the 'Speed Dial' tab.
2.
Click the 'New Entry' link to add a new speed dial entry. The 'Speed Dial Set-
tings' screen will appear
3.
Enter the following parameters:
- Speed Dial: A shortcut number which you will dial to call this party.
- Destination: The entry's destination, in this case a proxy server.
- User ID: Specify the remote party's user ID.
4.
Click 'OK' to save the settings.
Page 84 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Voice over IP Section
OGU 930500275-A1
77
Speed Dial via Local Line.
To add a new local line speed dial entry:
1.
Click the 'New Entry' link on the 'Speed Dial' tab and select the 'Local Line'
option from the combo-box.
2.
Enter the following parameters:
- Speed Dial: A shortcut number which you will dial to call this party.
- Destination: The entry's destination, in this case a local line.
- Line: A combo-box will display your pre-defined local lines. Select the des-
tination line.
3.
Click 'OK' to save the settings.
Speed Dial via Direct Call.
To add a new direct call speed dial entry:
1.
Click the 'New Entry' link on the 'Speed Dial' tab and select the 'Direct Call'
option from the combo-box.
2.
Enter the following parameters:
- Speed Dial: A shortcut number which you will dial to call this party.
- Destination: The entry's destination, in this case a direct call.
- User ID: Specify the remote party's user ID.
- IP Address or Host Name: Specify the remote party's IP Address or host
name.
3.
Click 'OK' to save the settings.
MONITORING
It is possible to access to the line monitoring page by selecting the ‘Monitoring’
Tab panel: the Registration Status and Call State for each line are shown.
FIGURE 3.
Monitoring Panel
Page 85 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
78
OGU 930500275-A1
Voice over IP Section
ADVANCED
The IP Telephony tab of the Voice over IP screen allows configuration of dialing
parameters, VoIP Signaling Protocol, media streaming parameters and codecs.
The following sections describe these various parameters.

Rate

4 / 5 based on 4 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top