Page 36 / 172
Scroll up to view Page 31 - 35
34
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
The password screen allows you to change the current password and set
the login time limit to the Router’s management interface.
Figure 19
Password Screen
1
To change the current password, enter the password in the
Current
Password
field.
2
Enter the new password in the
New Password
field, and enter it again in
the
Confirm New Password
field.
3
Enter the time period in
Login Timeout
to set a maximum period of time
for which the login session is maintained during inactivity (Default: 10
minutes).
Wizard -
Change Password
To ensure the security of your Router, it is recommended that you choose
a new password - this should be a mix of letters and numbers, and not
easily guessed by others. To leave the current password unchanged, leave
the fields blank and click
Next
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 37 / 172
Accessing the Setup Wizard
35
Figure 20
Change Password Screen
Wizard -
Time and Time Zone
The
Time and Time Zone
screen allows you to set up the time for the
Router.
Figure 21
Time and Time Zone Screen
1
Select the correct base date and time.
2
If you want to automatically synchronize the Router with a public time
server, check the
Enable
box in the
Using Time Server (NTP)
field.
3
Select the time zone in the
Set Time Zone
drop-down menu.
4
Enter the time in the
Synchronization Interval
field.
5
Select the desired servers from the
Time Server
drop-down menu.
6
Check the
Enable
box in the
Daylight Savings
field, if daylight savings
applies to your area.
7
Click
Next
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 38 / 172
36
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
Wizard -
Connection Type
The
Connection Type
screen allows you to set up the Router for the type
of Internet connection you have. Before setting up your connection type,
have your account information from your ISP ready.
Figure 22
Connection Type Screen
Select a mode from the following:
■
Dynamic IP
— Using DHCP function, see
page 37
■
Static IP
— Using fixed IP, see
page 38
■
PPPoE
— PPP over Ethernet, providing routing for multiple PCs, see
page 39
■
PPTP
— Point-to-Point Tunneling Protocol, see
page 40
■
L2TP
— Layer 2 Tunneling Protocol, see
page 41
and click
Next
.
For further information on selecting a mode see Internet Settings on
page 73
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 39 / 172
Accessing the Setup Wizard
37
Dynamic IP
This mode is often used in cable connection when the ISP assigns IP
address via DHCP. To set up the Router for use with a dynamic IP
connection, use the following procedure:
Figure 23
Host Name Screen
1
Host name is a name that some Internet Service Providers require for
connection to their system. This entry is optional, your Internet Service
Provider should provide this information.
2
Check all of your settings, and then click
Next
.
The LAN Settings screen will then be displayed (refer to
Figure 28
).
Downloaded from
www.Manualslib.com
manuals search engine
Page 40 / 172
38
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
Static IP
Use this option when you have a static IP assigned by your service
provider. To set up the Router for use with a static IP connection, use the
following procedure:
Figure 24
Static IP Screen
To assign a fixed IP address:
1
Enter your Internet IP address in the
IP address assigned by your Service
Provider
field.
2
Enter the subnet mask in the
Subnet Mask
field.
3
Enter the default gateway IP address in the
Service Provider Gateway
Address
field.
4
Enter the DNS address in the
DNS Address
field.
5
If there is a secondary DNS, enter the IP address in the
Secondary DNS
Address
field.
6
Check all of your settings, and then click
Next
.
The LAN Settings screen will then be displayed (refer to
Figure 28
).
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live