Page 26 / 128
Scroll up to view Page 21 - 25
30
C
HAPTER
4: R
UNNING THE
S
ETUP
W
IZARD
Figure 10
Router Login Screen
5
If the password is correct, the
Country Selection
screen will appear. Select
the country you wish to configure the Router for, then click
Apply
.
(
Figure 11
)
If your purchased your Router in the United States, you do not see this
screen, as it is automatically set.
Figure 11
Country Selection Screen
Page 27 / 128
Accessing the Wizard
31
6
When you have selected a country either:
■
The
Welcome
screen will appear (
Figure 12
). Select the
Wizard
tab
and click
Wizard.
or
■
If your Router has not been configured before, the Wizard will launch
automatically (refer to
Figure 13
).
7
Click
Next
.
8
You will be guided step by step through a basic setup procedure.
Figure 12
Welcome Screen
Page 28 / 128
32
C
HAPTER
4: R
UNNING THE
S
ETUP
W
IZARD
Figure 13
Wizard Screen
Password
Figure 14
Change Administration Password Screen
When the
Change Administration Password
screen (
Figure 14
) appears,
type the
Old Password
, then a new password in both the
New Password
and
Confirm Password
boxes.
3Com recommends entering a new password when setting up the Router
for the first time. The Router is shipped from the factory with a default
password,
admin
.
1. Password is case sensitive.
Page 29 / 128
Accessing the Wizard
33
2. Write the new password down and keep it in a safe place, so that you
can change your settings in the future.
Click
Next
to display the
Time Zone
setup screen (
Figure 15
).
Time Zone
Figure 15
Time Zone Screen
Select your time zone from the pull-down menu, check the daylight
savings option if required, and then click
Next
.
The Daylight Savings option advances the system clock by one hour. It
does not cause the system clock to be updated for daylight savings time
automatically.
WAN Settings
Figure 16
Internet Settings Screen
This
Internet Addressing Mode
window allows you to set up the Router
for the type of Internet connection you have. Before setting up your
Page 30 / 128
34
C
HAPTER
4: R
UNNING THE
S
ETUP
W
IZARD
Internet connection mode, have the modem setting information from
your ISP ready.
Select an Internet Addressing mode from the following:
■
PPPoE is required (typically DSL users only)
■
ISP provides configuration dynamically (via DHCP)
■
ISP has provided a static IP address
■
PPTP is required (some DSL users in Europe)
and click
Next
.
PPPoE Mode
Figure 17
PPPoE Screen
To setup the Router for use with a PPP over Ethernet (PPPoE) connection,
use the following procedure:
1
Enter your PPP over Ethernet user name in the
PPPoE User Name
text box.
2
Enter your PPP over Ethernet password in the
PPPoE Password
text box.
!
3
Enter your PPP over Ethernet service name in the
PPPoE Service Name
text
box.
19216811.live