Page 41 / 182
Scroll up to view Page 36 - 40
Accessing the Setup Wizard
39
Wizard - Time and
Time Zone
The
Time and Time Zone
screen allows you to set up the time for the
Router.
Figure 25
Time and Time Zone Screen
1
Select the correct base date and time.
2
If you want to automatically synchronize the Router with a public time
server, check the
Enable
box in the
Using Time Server (NTP)
field.
3
Select the time zone in the
Set Time Zone
drop-down menu.
4
Enter the time in the
Synchronization Interval
field.
5
Select the desired servers from the
Time Server
drop-down menu.
6
Check the
Enable
box in the
Daylight Savings
field, if daylight savings
applies to your area.
7
Click
Next
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 42 / 182
40
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
Wizard - Connection
Type
The Connection Type screen allows you to set up the Router for the type
of Internet connection you have. Before setting up your connection type,
have your account information from your ISP ready.
Figure 26
Connection Type Screen
Select a mode from the following options, and click
Next
:
■
PPPoE
— PPP over Ethernet, providing routing for multiple PCs,
see
page 41
■
PPPoA
— PPP over ATM, providing routing for multiple PCs,
see
page 42
■
Bridge Mode (for a single PC)
— RFC1483 Bridged Mode, see
page 43
■
Routing Mode over ATM
— RFC1483 Routed Mode, for multiple PCs,
see
page 44
■
Dynamic/Fixed IP in 1483 Bridge Mode (For Multiple PCs)
— see
page 45
For further information on selecting a mode see Internet Settings on
page 76
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 43 / 182
Accessing the Setup Wizard
41
PPPoE
PPPoE is often used for DSL connection. To set up the Router for use with
a PPPoE (PPP over Ethernet) connection, use the following procedure:
Figure 27
PPPoE Screen
1
Enter your user name in the
Username
field.
2
Enter your password in the
Password
field.
3
Re-type your password in the
Retype Password
field.
4
Enter your VPI and VCI information in the
VPI/VCI
fields.
5
Select the encapsulation type (LLC or VC MUX) in the
Encapsulation
drop-down menu. This information should be provided to you by your ISP.
Check all of your settings, and then click
Next
.
The LAN Settings screen will then be displayed (refer to
Figure 32
).
Downloaded from
www.Manualslib.com
manuals search engine
Page 44 / 182
42
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
PPPoA
To set up the Router for use with a PPP over ATM (PPPoA) connection, use
the following procedure:
Figure 28
PPPoA Screen
1
Enter your user name in the
Username
field.
2
Enter your password in the
Password
field.
3
Re-type your password in the
Retype Password
field.
4
Enter your VPI and VCI information in the
VPI/VCI
fields.
5
Select the encapsulation type (LLC or VC MUX) in the
Encapsulation
drop-down menu. This information should be provided to you by your ISP.
Check all of your settings, and then click
Next
.
The LAN Settings screen will then be displayed (refer to
Figure 32
).
Downloaded from
www.Manualslib.com
manuals search engine
Page 45 / 182
Accessing the Setup Wizard
43
Bridge Mode
(for a single PC)
Selecting the Bridge mode sets the device into 1483 bridging mode in
which the device connects LANs and WAN together. It operates as a Data
Link Layer device that acts to limit the traffic between two network
segments by filtering the data between them based on the hardware
address.
To set up the Router for use with an RFC1483 bridged connection, use
the following procedure:
Figure 29
Bridged Mode Screen
1
Enter your VPI and VCI information in the
VPI/VCI
fields.
2
Select the encapsulation type (LLC or VC MUX) in the
Encapsulation
drop-down menu. This information should be provided to you by your ISP.
Check all of your settings, and then click
Next
.
The LAN Settings screen will then be displayed (refer to
Figure 32
).
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live