Zyxel P660H-T3 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Zyxel P660H-T3 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 11
P-660H-Tx v2
ADSL2+ 4-port Gateway
Quick Start Guide
Version 3.40
2/2007
Edition 1
Page 2 / 11
P-660H-Tx v2 Quick Start Guide
2
Overview
The P-660H-Tx v2 is an ADSL router with a four-port built-in Ethernet switch.
See your
User’s Guide
for background information on all features.
This Quick Start Guide shows you how to:
Connect the hardware.
Set up your Internet connection. The device should connect to the Internet automatically if it is preconfigured. If
you were given Internet connection information from your Internet Service Provider (ISP), you may have to
set up the connection manually (See section
3
).
How to use the included CD
If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial
on the included CD.
1
On the included CD, click
Multimedia Auto Provisioner
>
Installation Tutorial
.
2
At the end of the tutorial, click
Configuration Genie
to set up your P-660H-Tx v2 to connect to the Internet.
Page 3 / 11
P-660H-Tx v2 Quick Start Guide
3
1 Hardware Connections
1 DSL
: Use the gray telephone wire to connect your P-660H-Tx v2’s
DSL
port to a telephone jack (or to a
splitter, if one is already installed).
2 ETHERNET
: Use the yellow Ethernet cable to connect a computer to an
ETHERNET
port for initial
configuration and/or Internet access.
3 POWER
: Use the power adaptor provided with your P-660H-Tx v2 to connect an appropriate power source
to the
POWER
socket. Make sure the power source is on.
4
Push in the
POWER
button.
5
Look at the lights on the front panel.
Page 4 / 11
P-660H-Tx v2 Quick Start Guide
4
• The
POWER
light blinks while your P-660H-Tx v2 starts up and stays on once it is ready.
• The
DSL
light is on when the P-660H-Tx v2 has a DSL connection.
• The
INTERNET
light is on when you are able to access the Internet and blinks when the P-660H-Tx v2 is send-
ing or receiving data.
• Each
ETHERNET
light stays on if the corresponding
ETHERNET
port is properly connected and blinks when
there is traffic.
If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are
still off, contact your local vendor.
2 Internet Connection Setup: Automatic
Use this section to have your P-660H-Tx v2 automatically detect and set up your Internet connection.
1
Open your web browser, and go to any web page (for example,
). Your P-660H-Tx v2
tries to detect your Internet connection.
2
Wait for the P-660H-Tx v2 to finish the connection test. This may take several minutes. If you do not see a
connection test screen similar to the following, go to step
5
.
3
If the connection test is successful, the following screen appears. Your Internet connection is ready for you
to use.
Page 5 / 11
P-660H-Tx v2 Quick Start Guide
5
4
If the connection test is not successful, you may see a screen similar to the following one. Follow the
instructions in the screen. If you still cannot access the Internet, follow the steps in the following section. You
should have information provided by your Internet Service Provider.
5
If you do not see the connection test screen, or if the connection test is not successful, check your
connections and restart the P-660H-Tx v2. If you still cannot access the Internet, follow the steps in the
following section. You should have information provided by your Internet Service Provider.
3 Internet Connection Setup: Wizard
Use this section to set up your Internet connection if automatic Internet connection does not work (see section
2
). You should have information from your Internet Service Provider (ISP).
1
Open your browser and enter the P-660H-Tx v2's IP address 192.168.1.1 (default) as the URL. If your
browser does not display a login screen, see
Troubleshooting
for details.
2
Enter the admin password
1234
(default). Click
Login
.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top