1. Home
  2. /
  3. Manuals
  4. /
  5. ZTE
  6. /
  7. F660
  8. /
  9. 5
Page 21 / 30 Scroll up to view Page 16 - 20
ZXHN F660 Product Description
ZTE Confidential & Proprietary
19
IPv6 address management
SLAAC allocation mode on LAN side
DHCPv6 on LAN side
SLAAC on WAN side
DHCPv6 on WAN side
DHCPv6-PD on WAN side
PPPoE+DHCPv6 on WAN side
PPPoE+SLAAC on WAN side
4.10
Management Function
OMCI management
TR-069 management
WEB management
Management via the OLT on the EMS
Built-in capability for remote management with standard compliance, including the
full range FCAPS functions like supervision, monitoring, and maintenance.
Port loopback detection
Performing MIB operation via the OMCI, including the create, delete, and get-next
commands
Remote software download, activation, and reboot via the OMCI
Dual image, version download, upgrading detection, and auto rollback
Page 22 / 30
ZXHN F660 Product Description
20
ZTE Confidential & Proprietary
4.11
Security Function
Traffic filtering based on UNI, VLAN ID, 802.1p, UNI + 802.1p, VLAN + 802.1p
Multicast , unicast and broadcast flow attack protection
MAC address limiting based on each UNI or single ONT
Broadcast packet rate limit
Anti-DoS attack
MAC filtering
4.11.1
Data Security of the GPON Interface
Because the GPON system works in broadcast mode in the downstream direction, the
malicious
users can easily intercept and attack other users’ messages. To enhance data
security of the user, the GPON downstream provides AES-128 encryption.
4.11.2
Traffic Suppression
Broadcast storm suppression
When the broadcast traffic including the unknown unicast and multicast traffic
exceeds the threshold that the user sets, the broadcast traffic will be discarded
till the traffic is lowered to a reasonable range, thereby avoiding network
congestion and ensuring normal operation of the network services.
4.12
Alarm Function
Dying gasp
Receiving optical power too high
Receiving optical power too low
Page 23 / 30
ZXHN F660 Product Description
ZTE Confidential & Proprietary
21
Transmission optical power too high
Transmission optical power too low
Port loopback alarm
Loss of signal
Loss of frame
Signal degradation alarm
Loss of GEM channel delineation
4.13
Performance Statistic Function
4.13.1
Statistic of Ethernet Port Performance Parameter
Frames transmitted
Single collision frames
Multiple collision frames
Bytes transmitted
Unicast frames
Multicast frames
Broadcast frames
Pause frames transmitted
Collision frames transmitted (half duplex mode)
Frames received
Bytes received
Page 24 / 30
ZXHN F660 Product Description
22
ZTE Confidential & Proprietary
Frame check sequence errors
Verification errors
Jumbo frames
Unicast frames received
Multicast frames received
Broadcast frames received
Runt frames received
Ethernet frames dropped (from UNI to NNI and vice versa)
5
Technical Indices and Parameters
5.1
Physical Structure, Environmental and Electrical
Indices
Table 5-1
Specifications and Environmental Indices of the ZXHN F660
Parameter
Nominal Value
Net dimensions
44mm
H
x220mm(W)x160mm (D)
Net weight
0.38kg
Typical Power consumption
<10 W
Noise
Null
Heat dissipation mode
Natural heat dissipation
Power supply
Rated 12 V DC (through the external AC/DC adapter)
Installation
Horizontal, Wall mounted
Operating environment
0
40
Relative humidity
5%
95%
Atmospheric pressure
70 kPa
106 kPa
Page 25 / 30
ZXHN F660 Product Description
ZTE Confidential & Proprietary
23
Parameter
Nominal Value
MTTR
30 mins
5.2
Interface Indices and Parameters
Table 5-2
GPON Interface Indices of the ZXHN F660
Parameter
Nominal Value
Connector type
SC/APC
Number of PON
1
Fiber type
Single-mode fiber
Wavelength
Transmitting end: 1310 nm (PON
interface)
Receiving end: 1490 nm (PON
interface)
Compliance standard of the PON
interface
ITU-T 984.x
Receiving rate of the optical interface
2.488 Gbps
Transmitting rate of the optical interface
1.244 Gbps
Transmission wavelength range
1290 nm
1330 nm
Root-mean-square spectral width of the
transmitting end
Less than 1 nm (-20 dB spectral
width)
Output optical power
Minimum 0.5 dBm, maximum 5 dBm
Optical power of the transmitter in output
OFF status
Less than -45 dBm
Extinction ratio
More than 10 dB
Receive range
1480 nm
1500 nm
Receive sensitivity
-28 dBm
Saturation optical power of the receiver
-8 dBm
Splitting ratio
1:64
Length of the optical link
20 km

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top