1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. F660
    5. /
  5. 3
Page 11 / 30 Scroll up to view Page 6 - 10
ZXHN F660 Product Description
ZTE Confidential & Proprietary
9
ZXHN F660 with External Antenna
Table 3-1 Description of the ZXHN F660
’
s Interfaces
Device Interface
Description
PON(PON)
SC/APC interface for fiber connection.
Fully compliant to ITU-T G.984.x GPON standards
Phone
Supports two Phone interfaces with RJ-11 connector
LAN
Supports four 10/100/1000 Base-T Ethernet
interfaces with RJ-45 connector
Supports half /Full Duplex and flow control, auto
negotiation or manual configuration
Supports MDI/MDIX auto-sensing
Power
12V Power Input Interface
+12V DC (via external AC/DC adapter: 90
–
240V,
50/60Hz AC input, 12V DC output )
USB
Support USB host interface, 2.0 standard
3.2
Device Buttons
The ZXHN F660's device Buttons as shown in Figure 3-1 and Figure 3-2 includes one
reset button, one power button, one Wi-Fi button and one WPS button.
Table 3-2
Description of the ZXHN F660
’
s Buttons
Device Button
Description
Reset
When the device is powered on, press the button for 1
second to restart the device. The user setting
information is not lost.
When the device is powered on, press the button for
more than 5 seconds to restore the device to the
factory default settings.
ON/OFF
Power on/off
Press the button (ON), the device is turned on
Press the button again (OFF), the button pops, and
the device is turned off
Page 12 / 30
ZXHN F660 Product Description
10
ZTE Confidential & Proprietary
Device Button
Description
Wi-Fi
Wi-Fi on/off
WPS
Start WPS processes
3.3
LED Indicators
Figure 3-2
LED Indicators of the ZXHN F660
Table 3-3 Description of the ZXHN F660
’
s LED Indicators
LED
Indicator
Definition
Color
LED Indicator
Power
Power supply
status
indicator
Green
OFF: The ZXHN F660 is powered off.
Constantly ON: The ZXHN F660 is
powered on.
PON
PON status
indicator
Green
OFF: The ZXHN F660 has not started
the registration process.
Constantly ON: The ZXHN F660 has
completed the registration process.
Flashing: The ZXHN F660 is
registering.
LOS
Optical signal
status
indicator
Red
OFF: The receiving optical power is
normal.
Constantly ON: The optical module of
the PON interface is powered off.
Flashing: The receiving optical power is
lower than the receive sensitivity of the
optical receiver.
Page 13 / 30
ZXHN F660 Product Description
ZTE Confidential & Proprietary
11
LED
Indicator
Definition
Color
LED Indicator
Internet
Internet status
indicator
Green
OFF: The ZXHN F660 is not powered
on or ethernet connection does not exi.
Constantly ON:
The internet
connection has been established
(routing connection has the correct IP
address or bridge link is normal);
Flashing: The data is transmitted via
internet connection.
LAN1
LAN2
LAN3
LAN4
Ethernet
interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the Ethernet interface is not
connected to any terminal device.
Constantly ON: The Ethernet interface
is connected but no data is transmitted
via the Ethernet interface.
Flashing: The data is transmitted via
the Ethernet interface.
Phone1
Phone2
Phone status
indicator
Green
OFF: The ZXHN F660 is not powered
on or unable to register on the soft
switch/IMS.
Constantly on: The ZXHN F660 has
registered on the soft switch/IMS but no
service flow is being transmitted.
Flashing: Data is being transmitted.
Wi-Fi
Wi-Fi interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the WLAN interface is forbidden.
Constantly ON: The WLAN interface
has been started.
Flashing: There is data transmission
via the WLAN interface.
WPS
WPS status
indicator
Green or
multiple
colors
Yellow LED flashing: The ZXHN F660
is performing code matching.
Red LED flashing: The ZXHN F660
detects session overlapping.
Green LED constantly ON: Code
matching successful.
Page 14 / 30
ZXHN F660 Product Description
12
ZTE Confidential & Proprietary
LED
Indicator
Definition
Color
LED Indicator
USB
USB interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the USB interface is not
connected.
Constantly ON: The USB interface is
connected and works in Host mode, but
no data is transmitted via the USB
interface.
Flashing: There is data transmission
via the USB interface.
4
Functions
4.1
GPON Function
ITU-T G.984 compatible
Flexible mapping between GEM port and T-CONT
Priority level queuing and scheduling of the upstream traffic
AES-128 encryption
FEC
Five types of T-CONT
Upstream traffic classification based on VLAN ID and 802.1p
Multicast GEM port
SN, password, and SN+password authentication
Auto-restart and recovery in power supply failure
Page 15 / 30
ZXHN F660 Product Description
ZTE Confidential & Proprietary
13
4.1.1
Bandwidth Allocation
Static bandwidth allocation
Adopts static bandwidth allocation mechanism in compliance with ITU-T
G.983.1
Dynamic bandwidth allocation (DBA)
Adopts fair DBA policy for the same CoS services during traffic congestion
Dynamic bandwidth status report mode complies with ITU-T G.984.3
4.1.2
GEM Adaptation
GEM mode
GEM frame mapping to GTC payload
Ethernet data frame mapping to GEM frame; Ethernet frame mapping into GEM
ports based on VLAN, CoS, or VLAN+CoS
4.1.3
T-CONT
Five types of T-CONT
T-CONT as the basic unit of the upstream service
T-CONT allocation based on the user and CoS; mapping to T-CONT queue based
on the CoS value or GEM port
T-CONT queue scheduling mode of WRR, SP, or WRR+SP
4.1.4
Operation and Maintenance
Physical layer operations and maintenance (PLOAM) defined in ITU-T G.984.3
OMCI defined in ITU-T G.984.4 \G.988 and OMCI extension

Rate

4.5 / 5 based on 2 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top