SmartRG SR360n Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of SmartRG SR360n router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 12
Quick Start Guide
SR360n
This Quick Start Guide shows you
how to set up and begin using
your new Gateway
Page 2 / 12
POWER
LAN 1-4
WLAN
WPS
DSL
INTERNET
DSL sync in progress
DSL sync acquired and gateway online
Gateway online and data transfer in progress
IP connection failure
Wi-Fi enabled on modem
PC / network activity / data transfer
WPS Setup procedure in progress
WPS Connection completed successfully
: On
: Off
: Blinking / active
LED INDICATORS
The LEDs on the front panel of the unit can assist you in
better understanding the current state of your modem.
LED INDICATORS
The LEDs on the front panel of the unit can assist you in
better understanding the current state of your modem.
Page 3 / 12
INSTALLATION
INSTALLATION
Connect one end of the supplied DSL cable to the port labeled DSL on the
gateway. Connect the other end of the supplied DSL cable to the DSL wall jack
installed by your provider.
For all other devices, connect the end of the Ethernet cable from that device
into any of the LAN ports on the gateway.
Connect the power cord into the wall outlet and into the power jack on the back
of the gateway. For additional
protection, connect the power cord into a surge
protector.
Turn on the gateway by pressing the power button on the back of the gateway.
Your gateway is automatically being set up to connect to the Internet. This
process may take a few minutes to complete before you begin using your
internet applications (browser, email, etc.). If you are unable to connect to the
Internet, confirm all cable connections and ensure that the router’s power is
turned on.
Connect one end of the supplied DSL cable to the port labeled DSL on the
gateway. Connect the other end of the supplied DSL cable to the DSL wall jack
installed by your provider.
For all other devices, connect the end of the Ethernet cable from that device
into any of the LAN ports on the gateway.
Connect the power cord into the wall outlet and into the power jack on the back
of the gateway. For additional
protection, connect the power cord into a surge
protector.
Turn on the gateway by pressing the power button on the back of the gateway.
Your gateway is automatically being set up to connect to the Internet. This
process may take a few minutes to complete before you begin using your
internet applications (browser, email, etc.). If you are unable to connect to the
Internet, confirm all cable connections and ensure that the router’s power is
turned on.
1
2
3
4
5
Page 4 / 12
INSTALLATION
INSTALLATION
1
2
3
4
5
Page 5 / 12
QUICK GATEWAY CONFIGURATION
QUICK GATEWAY CONFIGURATION
Logging in to your Gateway:
In order to change the settings on your gateway, you must first login. Ensure that
you have completed the above physical installation steps before you begin.
Open your internet browser application and type 192.168.1.1 into the address line.
Logging in to your Gateway:
In order to change the settings on your gateway, you must first login. Ensure that
you have completed the above physical installation steps before you begin.
Open your internet browser application and type 192.168.1.1 into the address line.
19216811.live