Page 6 / 66 Scroll up to view Page 1 - 5
4
Firewall
Supports simple firewall with NAT technology and provides option for blocking access from
Internet, like Telnet, FTP, WEB, SNMP and IGMP.
Domain Name System (DNS) relay
Provides an easy way to map the domain name (a friendly name for users such as
www.yahoo.com) and IP address. When a local machine sets its DNS server with this
router’s IP address, every DNS conversion request packet from the PC to this router will be
forwarded to the real DNS in the outside network.
Dynamic Domain Name System (DDNS)
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname.
This dynamic IP address is the WAN IP address. For example, to use the service, you must
first apply for an account from a DDNS service like
.
PPP over Ethernet (PPPoE)
Provides embedded PPPoE client function to establish a connection.
Users can get greater
access speed without changing the operation concept, sharing the same ISP account and
paying for one access account. No PPPoE client software is required for local computer. The
Automatic Reconnect and Disconnect Timeout (Idle Timer) functions are provided, too.
Virtual Server:
User can specify some services to be visible from outside users. The router can detect
incoming service request and forward it to the specific local computer to handle it. For
example, user can assign a PC in LAN acting as WEB server inside and expose it to the
outside network. Outside user can browse inside web server directly while it is protected by
NAT. A DMZ host setting is also provided to a local computer exposed to the outside network,
Internet.
Users can specify some services to be visible from outside users. The router can detect
incoming service requests and forward either a single port or a range of ports to the specific
local computer to handle it. For example, a user can assign a PC in the LAN acting as a
WEB server inside and expose it to the outside network. Outside users can browse inside
web servers directly while it is protected by NAT. A DMZ host setting is also provided to a
local computer exposed to the outside network, Internet.
Dynamic Host Configuration Protocol (DHCP) client and server
In the WAN site, the DHCP client can get an IP address from the Internet Service Provider
(ISP) automatically. In the LAN site, the DHCP server can allocate a range of client IP
addresses and distribute them including IP address, subnet mask as well as DNS IP
address to local computers. It provides an easy way to manage the local IP network.
RIP1/2 Routing
Page 7 / 66
5
Supports RIP1/2 routing protocol for routing capability.
Simple Network Management Protocol (SNMP)
It is an easy way to remotely manage the router via SNMP.
Web based GUI
Supports web based GUI for configuration and management. It is user-friendly and comes
with on-line help. It also supports remote management capability for remote users to
configure and manage this product.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
1.3 Applications for the H6300G
Computer
Wall
phone
socket
Telephone
(optional)
Micro
Filter
Power
Adapter
Page 8 / 66
6
Chapter 2
Installing the H6300G
2.1 Important note for using the H6300G
2.2 Package Contents
H6300G ADSL2+ Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
AC-DC power adapter (12V DC, 1A)
Quick Installation Guide
°
Place the H6300G on a stable surface.
°
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
Attention
°
Do not use the H6300G Series in high humidity or high
temperatures.
°
Do not use the same power source for the H6300G as other
equipment.
°
Do not open or repair the case yourself.
If the H6300G is too
hot, turn off the power immediately and have it repaired at a
qualified service center.
°
Avoid using this product and all accessories outdoors.
Warning
Page 9 / 66
7
2.3 The Front LEDs
LED
Description
13
INTERNET
Lit steady when there is a PPPoA / PPPoE connection.
Lit and flashed periodically when there is email in the Inbox.
12
ADSL
When lit, it indicates that the ADSL (Line) port is connected to the
DSLAM and working properly.
8-11
ETHERNET Port
1X
4X
(RJ-45 connector)
Lit when the LAN link is connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
7
WLAN
Lit green when the wireless connection is established.
Flashes when sending/receiving data.
6
SYS
Lit when the system is ready.
5
PWR
Lit when power is ON.
Page 10 / 66
8
2.4 The Rear Ports
Port
Meaning
1
PWR
Connect the supplied power adapter to this jack.
2
RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds
: reset the device
6 seconds above
: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
3
LAN
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
4
ADSL
(LINE)
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
5
Power
Switch
Power ON/OFF switch
1
2
4
3
5

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top