www.netcommwireless.com

21

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

WAN Service

This screen provides a summary of the current WAN interfaces you have configured. If you have connected the NB604N to an

ADSL connection through the ADSL Quick Setup interface, details of the connection will be summarized here. You can also add or

remove WAN Services.

To remove a currently configured WAN Service, Click the remove checkbox corresponding to the chosen service and click Remove.

To create a new WAN Service connection:

1.

Click Add.

2.

Select a currently unused ATM interface

3.

Select the connection type and enter a description for the WAN Service.

4.

Select to enable IPv6 support for the connection (if needed).

5.

Enter the connection settings applicable for the connection type.

NB604N

–

ADSL2+ Wireless N300 Modem Router

22

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

www.netcommwireless.com

In the case of a PPPoE connection, the following options are available:

PARAMETER

DEFINITION

PPP Username and Password

The username and password required to access the service

PPPoE Service Name

A name to identify the configured service

Authentication Method

Select the authentication method in use on the service

MTU

Set the Maximum Transmit Unit (MTU) size for the connection

Enable NAT

Select to enable or disable Network Address Translation (NAT) for this connection

Enable Fullcone NAT

Select to enable Fullcone NAT on the connection.

Dial on Demand

Select to enable dial on demand mode. Enter the idle time to wait before disconnecting the service.

PPP IP Extension

Select to enable PPP IP Extension on the connection

Static IPv4 Address

Enter a static IP Address to utilise with the connection

Enable IPv6

Select to enable IPv6 support for the connection. This enables the NB604N to Request Prefix Delegation and

request an IPv6 Address.

Enable IGMP Multicast Proxy

Enable IGMP Proxy mode on the connection. This is commonly used for IPTV.

Enable MLD Multicast Proxy

Enable MLD Proxy mode. This is the IPv6 equivalent of IGMP proxy mode.

Click Next once the connection configuration details have been entered.

(a)

Select the Default Gateway Interface to use for the connection and click Next

(b)

Select the DNS Server Interface to use for the connection and click Next

(c)

Review the configured functions of the connection and click Save/Apply to save the new WAN Service

connection.

www.netcommwireless.com

23

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

In the case of an IP over Ethernet connection, the following options are available:

PARAMETER

DEFINITION

Obtain an IP Address automatically

Select to use DHCP for the connection. The DHCP options can then be set.

Option 55

–

Set the DHCP Parameter request List

Option 58

–

Set the length of time between DHCP lease renewals

Option 59

–

Set the length of time between DHCP rebinding

Option 60

–

Set the DHCP VCI

Option 61 (IAID)

–

Set the DHCP Identity Association ID

Option 61 (DUID)

–

Set the DHCP Unique Identifier

Option 125

–

Set to enable or disable DHCP Vendor-Identifying Vendor Options

Use the following Static IP Address

Select to use a Static IP Address for the connection

WAN IP Address

Enter the Static IP Address to use for the connection

WAN Subnet Mask

Enter the subnet mask to use for the connection

WAN gateway IP Address

Enter the gateway IP address to use for the connection

Primary DNS Server

Enter the Primary DNS server to use for the connection

Secondary DNS Server

Enter the secondary DNS server to use for the connection

Request IPv6 Address

Select to request an IPv6 on the connection

Request Prefix Delegation

Select to request IPv6 Prefix Delegation for the connection

Click Next once the connection configuration details have been entered.

(a)

Select to enable NAT, Fullcone NAT or the builtin Firewall function for the connection

(b)

Select to enable IGMP Multicast mode for the connection and click Next

(c)

Select the Default Gateway Interface to use for the connection and click Next

(d)

Select the DNS Server Interface to use for the connection and click Next

(e)

Review the configured functions of the connection and click Save/Apply to save the new WAN Service

connection.

In the case of a bridged connection, click Save/Apply to save the new WAN Service connection.

NB604N

–

ADSL2+ Wireless N300 Modem Router

24

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

www.netcommwireless.com

LAN

The LAN window allows you to modify the settings for your local area network (LAN).

The following options are available to configure:

PARAMETER

DEFINITION

IP Address

Enter the IP Address to use for the NB604N

Subnet Mask

Enter the subnet mask

Enable IGMP Snooping

Enable IGMP Snooping and select the IGMP Snooping mode to use

Enable LAN side Firewall

Enable the LAN side firewall to restrict traffic between LAN hosts

Enable DHCP Server

Select to enable or disable the DHCP server and enter the start and end address for the DHCP IP Address

pool.

Configure the second IP Address

This option enables you to set a secondary IP Address for the NB604N

You can also reserve DHCP Addresses for specific hosts as shown below:

To set a DHCP reservation, enter the MAC Address of the chosen host and IP to use and then click Apply/Save.

The NB604N enables you to set the DHCP options which are provided to hosts attempting to connect to the DHCP server.

These options should not normally need to be set or changed.

Click Apply/Save to save the new LAN configuration settings.

www.netcommwireless.com

25

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

IPv6 Autoconfig

The NB604N offers a stateless IPv6 Autoconfig function for IPv6 enabled devices connected via the LAN.

The following auto configuration options are available:

PARAMETER

DEFINITION

Interface Address

Set the IPv6 Address of the NB604N

Enable DHCPv6 Server

Select to enable the stateless DHCPv6 Server

Enable RADVD

Select to enable the Router Advertisement Daemon

Site Prefix Configuration

Select to use either the Site Prefix as supplied by the WAN connection or manually enter the Site Prefix and Site Prefix

Length

Enable MLD Snooping

Select to enable MLD Snooping and the MLD Snooping mode to use

Click Save/Apply to save the new IPv6 Autoconfig settings.