M S I R G 3 0 0 E X （ L i t e )

3. Right click the appropriate ’LAN Connection’.

4. Click ‘Properties’.

Page 40 of 52

M S I R G 3 0 0 E X （ L i t e )

5. Select ‘Internet-protocol (TCP/IP)’.

6. Click ‘Properties’.

Page 41 of 52

M S I R G 3 0 0 E X （ L i t e )

7. Select ‘Use the following IP Address’.

8. Enter ‘192.168.0.25’ in the ‘IP Address’ field.

9. Enter ‘255.255.255.0’ in the ‘Subnet mask’ field.

10. Click ‘OK’.

Page 42 of 52

M S I R G 3 0 0 E X （ L i t e )

11. Enter ‘http://192.168.0.200’ in the address bar to log in to the RG300EX

（

Lite).

4.3Configuring your wireless router (1)

When configuring the router and its security (paragraph 5.5), we assume you will be using the RG300EX

（

Lite) as a wireless router. Make sure your wireless router is connected to your computer using a UTP

network cable.

1. Open your web browser (e.g. Internet Explorer, Opera or Firefox).

2. Type ‘

’ in the address bar.

3. Press the ‘Enter’ key or click ‘Go to’.

4. You will now be asked for a ‘Username’ and a ‘Password’. Fill in ‘admin’ in the

‘

Username’ field and

‘admin’ in the ‘Password’ field and press the enter key.

5. The login screen is shown.

6. Click ‘Wireless Wizard’.

7. The wizard appears in a pop-up screen. Click ‘Next’.

8. Choose you country/region and click ‘Next’.

9. Fill in the desired name for your wireless network in the field ‘SSID’. (Use the

‘

Check SSID’ option to

ensure this name is not already in use.)

10. Click ‘Next’.

11. The RG300EX

（

Lite) will automatically scan for a suitable wireless channel.

12. As a choice, the most suitable wireless channel will appear on your screen.

13. Select the same channel you have chosen for your signal booster.

Page 43 of 52

M S I R G 3 0 0 E X （ L i t e )

14. Click ‘Next’.

15. You will see a brief summary with the settings you have made so far. Click ‘Next’ to continue.

16. Choose ‘WPAPSK’ and click ‘Next’.

17. Choose ‘TKIP’ and click ‘Next’.

18. Fill in the same password in the field ‘Network Key’ you have chosen for your signal booster.

19. Click ‘Next’.

20. Click ‘Finish’.

21. The wizard will now save the settings and will close the screen automatically.

4.4 Connecting your wireless router with the signal booster

(2)

If you have followed the previous steps, then you have filled in the following:

- The signal booster (2) has the following IP-address: ‘192.168.0.200’.

- The wireless router has the following IP-address: ‘192.168.0.1’.

- Both devices are using the WPA protocol and are both using the same security key.

- Both devices are using the same channel.

- The SSID does not need to be the same (e.g. ‘Upstairs’ and ‘Downstairs’).

Both devices must be set up in order to connect to each other. We will begin setting up your wireless

router .

1. Connect the wireless router and the signal booster to each other using the following steps: Connect a

network cable to LAN4 of the wireless router. Connect the other end of the network cable to LAN4 of the

signal booster.

2. Connect a computer using a network cable to LAN port 1 of the wireless router.

3. Turn on your wireless router and the signal booster.

4. Turn on your computer.

5. Open your web browser (e.g. Internet Explorer, Netscape or Firefox).

6. Type ‘

’ in the address bar.

7. Click ‘Setup Tool’.

8. Click ‘Advanced Setup’ in the left menu.

Page 44 of 52