Chapter 2

The Installation Wizard

16

2.5

Configuración Básica

In the

Configuración Básica

section of the wizard, you can set the services you want to use on the

Router

.

Make sure the services are provided by your service provider. Click the

Configuración

Básica

button to show the following screen.

1

In the

Tipo de Servicio Contratado

section, if your service provider provides IPTV service, select

TRIO

.

If not, select

DUO

:

•

DUO:

Internet and VoIP service

•

TRIO:

Internet, VoIP, and IPTV service

2

If VoIP service is available, select

SI

from the

Tu linea de Voz

section. Otherwise, select

NO

.

3

Click

Asistente de Instalación

to go to the next screen.

2.5.1

IPTV Configuration

The screens

in this section are available only when

TRIO

is selected in the previous screen.

The way your set-top box obtains its IP address depends on the service provider.

Chapter 2

The Installation Wizard

17

A.

If your service provider provides an IP for the set-top box, select

Estático

.

1

Click

Asistente de Instalación

to show the following screen.

2

The NAT feature is disabled and

you need to enter the router’s LAN IP address in

Dirección IP

(LOCAL)

. Enter the IPTV (set-top box)’s IP address (from the service provider) in

Dirección IP TV

and

subnet mask in

Máscara de subred

.

3

Click

Siguiente

to go to the next screen.

Chapter 2

The Installation Wizard

18

B.

If your service provider did not provide an IP for the set-top box, select

Dinámico NatPat

to

enable the NAT feature, so the set-top box obtains its IP address automatically from the service

provider.

1

Click

Asistente de Instalación

to show the following screen.

2

The IPTV (set-top box)’s IP address and subnet mask are already configured. If no change is

required, click

Siguiente

to go to the next screen.

Chapter 2

The Installation Wizard

19

2.5.2

VoIP Configuration

This screen is available only when If you selected

SI

from the

Tu linea de Voz

section in the

Configuración Básica

screen.

1

You need to enter your SIP account number (provided by your service provider) in the following

screen.

2

Click

Siguiente

to go to the next screen.

3

A summary of your settings will appear. Click

Aplicar

to continue.

Chapter 2

The Installation Wizard

20

4

If you need to configure other settings such as the the Router’s LAN and wireless features, click on

the IP address shown in the following screen to go to the

Client Wizard

screens. If not, click

Salir

to

finish.

2.6

Configuración Avanzada

In the

Configuración Avanzada

section of the wizard, you can access all of the configuration

screens of the Router which can be used for advanced setup. Find detailed information on each

configuration screen, starting from

Chapter 5 on page 38

.

1

Click the

Configuración Avanzada

button.

2

Click

Aceptar

after reading the following notice.