16

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750

Vers: 022515

w

Encryption:

When selecting WPA or WPA2 security two new options will appear

the first is Encryption. This allows you to set the Encryption type used by WPA/

WPA2 the options include AES, TKIP&AES and TKIP. AES is the default and recom-

mended setting.

w

WPA Passphrase:

When selecting WPA or WPA2 security two new options will

appear the second is WPA Passphrase. This allows you to set the Passphrase used

to connect to the SSID. WPA Passphrases must be a minimum of 8 to a maximum

of 63 Characters and can contain Letters (capitol and lowercase), Numbers, Special

Characters and Spaces.

w

Channel:

Allows you to specify the Channel used by the 5GHz Radio in the Router,

the supported Channels will change depending on the Wireless Mode 802.11ac+n+g

offers 40 and 153. While 802.11a offers 36, 40, 44, 48, 149, 153, 157, 161 and 165 (the

available options are non-overlapping channels) 153 is the default setting.

w

Save:

This button is used to Save the configuration changes made on this page.

Once you have clicked Save you may move to other pages in the Router setup.

Most changes will require a Reboot to allow the changes to take effect.

w

Reboot:

This button is used to Reboot the Router after making configuration

changes or can be used to Reboot the Router for any reason.

w

Cancel:

This button Cancels any changes made on this page.

NOTE:

After making any changes to the Internet / WAN and/or Local

Network / LAN you must click the Save button to Save your changes,

then you must click the Reboot button for the changes to take

effect. You can click the Save button and proceed to other pages

without losing your configured changes.

3.2 Status

There are three submenus in the Status menu; Overview, Connected Clients and

Wireless Connections. Click a submenu to view and/or modify the

corresponding settings.

3.2.1 Overview

This page displays the System, Internet / WAN Settings and Local Network / LAN

Settings configured on the Router.

17

User Guide

© 2015

Luxul. All Rights Reserved.

Other trademarks and registered trademarks are the property of their respective owners

Select the menu

Status>>Overview

to display the following page:

±

System

: Displays the XWR-1750 System properties.

w

Firmware Version:

Displays the Version of Firmware running on the Router.

w

Hardware Version:

Displays the Hardware Version of the Router.

w

CPU Usage:

Displays the percentage of CPU Cycles currently occupied.

w

Memory Usage:

Displays the percentage of Memory currently in use.

w

Uptime:

Displays how long it has been since the Router has rebooted.

w

Curent Date/Time:

Displays the Date/Time pulled from the NTP Servers on the

Internet.

±

Internet / WAN Settings:

Displays the WAN Settings of the Router.

w

Connection Type:

Displays the WAN Connection Type configured

on the Router.

w

IP Address:

Displays the WAN IP Address assigned to the Router.

w

Subnet Mask:

Displays the WAN Subnet Mask assigned to the Router.

w

Gateway:

Displays the WAN Gateway IP Address assigned to the Router.

w

DNS Server:

Displays the Primary DNS Server IP Address assigned to the Router.

w

Alternate DNS:

Displays the Secondary DNS Server IP Address assigned

to the Router.

w

MAC Address:

Displays the current WAN Port MAC Address assigned to the Router.

±

Local Network / LAN Settings:

Displays the current LAN Settings of the Router.

18

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750

Vers: 022515

w

IP Address:

Displays the LAN IP Address of the Router. This address will be the

Default Gateway for all client devices in the Local Network.

w

Subnet Mask:

Displays the LAN Subnet Mask of the Router. This Mask will be the

Subnet Mask for all client devices in the Local Network.

w

MAC Address:

Displays the LAN MAC Address assigned to the Router.

NOTE:

If DHCP or PPPOE is the configured Connection Type and the IP

Address, Subnet Mask, Gateway, DNS Server and/or Alternate DNS

information is blank, no information was received from the ISP’s

Modem. Please check configuration and if any changes were made

please verify they were Saved and the Router was Rebooted.

NOTE:

If a Custom MAC Address was specified it will be displayed as the

Internet / WAN Settings MAC Address.

NOTE:

If you notice a missing Alternate DNS IP Address, we recommend

going to Quick Setup then select the Secondary DNS checkbox and

manually adding a Secondary DNS Server. You must Save and Reboot

for the changes to take effect.

3.2.2 Connected Clients

This Page displays the Client Devices that have requested a DHCP Address from

the XWR-1750.

Select the menu

Status>>Connected Clients

to display the following page:

19

User Guide

© 2015

Luxul. All Rights Reserved.

Other trademarks and registered trademarks are the property of their respective owners

±

Connected Clients:

Displays the current DHCP Leases issued by the Router.

w

Device Name:

Displays the Hostname reported by the device or the Hostname

specified in the Static Lease (see

Network>>Static Leases

for details).

w

IP Address:

Displays the IP Address issued to the Client Device by the Router’s

DHCP server.

w

MAC Address:

Displays the MAC Address of the Client Device.

NOTE:

This list will be blank after the Router has been rebooted until the

client devices have requested a new DHCP Address from the Router.

3.2.3 Wireless Connecitons

This Page displays the Client Devices that connected wirelessly to the XWR-1750.

Select the menu

Status>>Wireless Connections

to display the following page:

±

SSID:

Displays the SSID (Wireless Network Name) and Wireless Mode.

w

Data Received:

Displays the amount of Data Received on this SSID in Megabytes.

w

Data Transmitted:

Displays the amount of Data Transmitted by this SSID

in Megabytes.

w

Clients:

Displays the number of connected Wireless Client devices.

w

MAC Address:

Displays the MAC Address of the connected Wireless Client.

w

Rate:

Displays the maximum theoretical Data Rate the client is

capable of.

20

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750

Vers: 022515

NOTE:

The information categories are the same for the 2.4GHz SSID and

5GHz SSID.

NOTE:

The Rate value for all devices will change depending on Wireless

signal quality and strength

3.3 Network

There are four submenus in the Network menu: DHCP Server, Static Leases, Dynamic

DNS and Routing. Click a submenu to view and/or modify the corresponding settings.

3.3.1 DHCP Server

This page displays the DHCP Server Settings configured on the Router.

Select the menu

Network>>DHCP Server

to display the following page:

±

DHCP:

Displays the DHCP Server settings of the Router. These settings can be viewed

or modified here.

w

Enable DHCP Server:

Allows you to Enable or Disable the Router’s DHCP Server.

Enabled is the default setting.

±

DHCP Range:

Displays the DHCP Pool settings of the Router. These settings can be

viewed or modified here.

w

Start:

Allows you to set the Starting IP Address of the DHCP Pool. 192.168.0.100 is

the default setting.

w

End:

Allows you to set the Ending IP Address of the DHCP Pool. 192.168.0.200 is the

default setting.