Linksys SRW224 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys SRW224 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 104
A Division of Cisco Systems, Inc.
®
Model No.
WIRED
with WebView and Power over Ethernet
24-Port 10/100 + 2-Port Gigabit Switch
SRW224P
User Guide
Page 2 / 104
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All
rights reserved. Other brands and product names are trademarks or registered trademarks of their respective
holders.
How to Use This User Guide
This User Guide has been designed to make understanding networking with the Switch easier than ever. Look for
the following items when reading this User Guide:
In addition to these symbols, there are definitions for technical terms that are presented like this:
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure numbers and descriptions can also be found in the “List of Figures” section in the “Table of Contents”.
This exclamation point means there is a caution or warning and
is something that could damage your property or the Switch.
This checkmark means there is a note of interest and is something
you should pay special attention to while using the Switch.
This question mark provides you with a reminder about
something you might need to do while using the Switch.
word:
definition.
Figure 0-1: Sample Figure Description
SRW224P-UG-51008 KL
WARNING:
This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm.
Wash hands after handling.
Page 3 / 104
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
Table of Contents
Chapter 1: Introduction
1
Welcome
1
What’s in this Guide?
2
Chapter 2: Getting to Know the Switch
3
The Front Panel
3
The Back Panel
4
The Side Panel
4
RJ-45 Ports
5
The Gigabit Expansion Ports
5
The Console Port
5
Chapter 3: Connecting the Switch
6
Overview
6
Pre-Installation Considerations
7
Hardware Installation
8
Placement Options
8
Uplinking the Switch
9
Chapter 4: Configuration using the Console Interface
10
Overview
10
Configuring the Switch through the Console Interface
11
Chapter 5: Configuring the Switch through the Web Utility
24
Overview
24
System Information
25
IP Config
31
Switch Config
33
QoS
43
DiffServ
50
Security
56
SNTP
65
Statistics
66
PoE
68
Spanning Tree
71
SNMP
75
IGMP
76
Maintenance
80
Page 4 / 104
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
Help
82
Appendix A: Fast Ethernet and Gigabit Ethernet
83
About Fast Ethernet
83
About Gigabit Ethernet
83
Appendix B: Cabling
84
Overview
84
Twisted Pair Cabling
84
Fiber Optic Cabling
84
Appendix C: Glossary
85
Appendix D: Specifications
88
Appendix E: Warranty Information
89
Appendix F: Regulatory Information
90
Appendix G: Contact Information
96
Page 5 / 104
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
List of Figures
Figure 2-1: Front Panel
3
Figure 2-2: Back Panel
4
Figure 2-3: Side Panel
4
Figure 3-1: Typical Network Configuration
6
Figure 3-2: Attaching the Switch’s Rubber Feet
8
Figure 3-3: Attaching Brackets to the Switch
9
Figure 3-4: Mounting the Switch
9
Figure 4-1: Finding Hyperterminal
10
Figure 4-2: Connection Description
10
Figure 4-3: Password Screen
10
Figure 4-4: COM1 Properties
11
Figure 4-5: Login
11
Figure 4-6: Switch Main Menu
12
Figure 4-7: System Configuration Menu
12
Figure 4-8: System Information
13
Figure 4-9: Versions
13
Figure 4-10: General Information
13
Figure 4-11: Serial Port Configuration
14
Figure 4-12: CPU Performance
14
Figure 4-13: User and Password Settings
15
Figure 4-14: IP Configuration
16
Figure 4-15: IP Address Configuration Screen
16
Figure 4-16: HTTP
16
Figure 4-17: SNMP
17
Figure 4-18: Network Configuration/PING
17
Figure 4-19: File Management
18
Figure 4-20: Restore System Default Settings
19
Figure 4-21: Reboot System
19
Figure 4-22: Back to Main Menu
20
Figure 4-23: Port Status
21

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top