Wireless Settings Configuration

This page will then display

Note:

The basic setting for your Router is completed. You will be able to access to the

Internet, if not, please refer to the

troubleshooting

3

Network

Wireless

Firewall

Virtual Server

QOS

Quick Setup

Quick Setup

Qucik Setup

Network name(SSID)

Security

WPA Algorithms

Key

Back

Back

Cancel

Cancel

Apply

Apply

AES

TKIP&AES

Next

Next

B-LINK_90E09F

WPA2-PSK

Create a unique and easy-to-remember

name for your wireless network.You can

also keep default settings without the

device being affected.

Select Security and WPA

Algorithms,

Suggest to choose “AES”.

Set up a wireless Key,the length is

more than 8 characters.

Click

Apply

5

3.Troubleshooting

FAQ1: What should I do if I forget the user name and password?

(How to restore the router 's configuration to its factory default settings.)

Answer: If you forget the user name and password, the only way to solve this

problem is to

reset the router. Press and hold the RESET button on the rear panel for 5 to 8 seconds before

releasing it.

FAQ2: What can I do if I cannot access the Internet?

MAC Address Clone

Clone MAC

Cancel

Cancel

Apply

Apply

Restore

MAC Address:

44:33:4C:90:E0:98

Hold for

5 to 8

seconds

FAQ3: How to configure the IP address of the computer?

Go to

Start

>

Control Panel

,

you will then see the following

page.

Click

Network and

Internet Connections

6

2.Disconnect the Router and directly connect your computer to the Modem and try to access

the Internet. If you still cannot access to the Internet, please contact

your ISP or the Modem's

manufacturer; otherwise, please reconnect the physical connection between your Modem,

3.Make sure that you are connected to the Router with the computer that was originally

connected to your modem, then login to the web-based management page and browse to

"Network > MAC Clone", click "Clone MAC" and then click "Apply". Reboot the Router and

try to access the Internet from your computer, if the problem still, please go to the next step.

1.Check to see if all the connectors are connected well, including the telephone line (for your

modem), Ethernet cables and power adapter.

Router and the computer, then continue to follow the next step.

Click

Network

Connections

Right-click

Local

Area Connection

Click

Properties

7

Double-click

Internet

Protocol (TCP/IP)

Select

Obtain an IP

address automatically

Select

Obtain DNS server

address automatically

Click

OK

8

Click

OK

Click

View network

status and tasks

Click

Properties

Right-click

Local

Area Connection

Go to

Start

>

Control Panel

,

you will then see the following

page.

9

Click

Change

adapter settings