Page 16 / 70
Scroll up to view Page 11 - 15
150M Wireless-N Broadband Router
(iB-WRB150N)
15
●
IP address
: Enter 192.168.1.xxx (xxx can be any value from 2~254).
●
Subnet mask
: Enter 255.255.255.0.
●
Default gateway
●
Preferred DNS server
: Enter 192.168.1
.1 in case that you don’t know
the local DNS server address (Or contact your ISP for help).
At last, click OK to save your settings.
3.2 Login to Router
1. With a Web-based utility, it is easy to configure and manage the
iB-WRB150N 150Mbps Wireless -N Router.
To access the configuration utility, open a web-browser and type in the
default address
in the address bar
1.
Type password
“
admin
”
and then click ok to go to interface below:
Note:
Web-based utility can be used on any Windows, Macintosh or UNIX
OS with a Web browser, such as Microsoft Internet Explorer 8.0 / 9.0
(Suggested) & Mozilla Firefox.
Page 17 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
16
3.3 Quick Internet Connection Setup
There are 2 Internet connection types on this screen, ADSL dialup
(PPPoE) and Dynamic IP (DHCP).
PPPoE
Select PPPoE, if your ISP are using a PPPoE connection and enter
the PPPoE user name and password provided by your ISP. Then setup a
wireless security key on the interface below to secure your wireless
network. At last, click the OK button to save your settings.
Dynamic IP
Select Dynamic IP as per your ISP details provided.
We recommend you to setup a wireless security key on this interface
to protect your wireless network from undesired access.
Then click the OK button to save your settings.
Page 18 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
17
●
The default Internet connection type is PPPoE. Contact your ISP if you
are not clear about the PPPoE user name and password.
●
Go to Chapter4 > WAN Settings, if you are using an Internet connection
type other than the above- mentioned.
3.4 Quick Wizard
Click the quick wizard to configure the quickly the WAN settings &
Wireless key.
WAN Setup > you can configure PPPoE or Dynamic IP settings
(Check for more settings as provided from ISP)
Wireless > you can configure the WPA2-PSK Wireless security
key to secure wireless connection.
For more settings you can use the standard menu of advanced setup
Page 19 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
18
Chapter 4 Network Settings
4.1 Status Info
This section allows you to view the router’s WAN and system
information.
●
Connection Status
: Displays WAN connection status: Disconnected,
Connecting or Connected.
Disconnected
: Indicates that the Ethernet cable from your ISP side is
not connected to the WAN port / connection problem of cable
line.
Connecting
: Indicates that the WAN port is correctly connected and
is requesting an IP address from your ISP.
Connected
: Indicates WAN port has been connected to your ISP.
●
WAN IP
:
Displays WAN IP address.
●
Subnet Mask
: Displays WAN subnet mask.
●
Gateway
: Displays WAN gateway address.
●
Primary DNS
: Displays WAN primary DNS address.
●
Secondary DNS
: Displays WAN secondary DNS address.
●
Connection Type
: Displays current Internet connection type.
Page 20 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
19
●
LAN MAC Address
: Displays router’s LAN MAC address.
●
WAN MAC Address
: Display
s router’s WAN MAC address.
●
System Time
: Displays the time when system is updated.
●
Connected client
: Displays the number of connected computers (which
obtains IP addresses from the device’ DHCP server).
●
Software Version
:
Displays router’s firmware v
ersion.
●
Hardware Version
: Displays router’s hardware version.
4.2 WAN
There are 5 Internet connection types available for your selection:
PPPoE, Static IP
，
Dynamic IP
，
PPTP and L2TP. Select your Internet
connection type and follow corresponding instructions below:
4.2.1 PPPoE
Select PPPoE, if your ISP are using a PPPoE connection and provide
you with PPPoE user name and password information.
19216811.live