INTRODUCTION
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
5
Hitron CGNM/ CGNM-3552 User’s Guide
Table 2:
Hardware Connections
WPS
Press this button to begin the WiFi Protected Setup
(WPS) Push-Button Configuration (PBC) procedure.
Press the PBC button on your wireless clients in the
coverage area within two minutes to enable them to join
the wireless network.
See
WPS
on page
79
for more information.
USB
The CGNM/ CGNM-3552 provides two USB 2.0 host
ports on the rear, allowing you to plug in USB flash disks
for mounting and sharing through the LAN interfaces via
the Samba protocol (network neighborhood).
The CGNM/ CGNM-3552 supports the following
Windows file systems:
FAT16
FAT32
NTFS
USB devices must not drain more than 500mA
from the USB port. USB devices requiring
more than 500mA should be provided with
their own power source(s).
Reset
Use this button to reboot or reset your CGNM/ CGNM-
3552.
Press the button and hold it for less than five seconds
to reboot the CGNM/ CGNM-3552. The CGNM/
CGNM-3552 restarts, using your existing settings.
Press the button and hold it for more than five
seconds to delete all user-configured settings and
restart the CGNM/ CGNM-3552 using its factory
default settings. See
Factory Default Resetting the
CGNM/ CGNM-3552
on page
14
for more
information on resetting the CGNM/ CGNM-3552.
NOTE:
Unless you previously backed-up the CGNM/
CGNM-3552’s configuration settings prior to
resetting the CGNM/ CGNM-3552, the settings
cannot be recovered.
19216811.live