Page 36 / 335 Scroll up to view Page 31 - 35
Vigor2710 Series User’s Guide
24
2.4.4 1483 Routed IP
Click
1483 Routed IP
as the protocol. Type in all the information that your ISP provides for
this protocol.
After finishing the settings in this page, click
Next
to see the following page.
Click
Finish.
Then, the system status of this protocol will be shown.
Page 37 / 335
Vigor2710 Series User’s Guide
25
2.5 Service Activation Wizard
Service Activation Wizard can guide you to activate WCF service (Web Content Filter) with
a quick and easy way.
For the Service Activation Wizard is only available for admin
operation, therefore, please type “admin/admin” on Username/Password while Logging
into the web configurator.
Note:
Web Content Filter (WCF) is not a built-in service of Vigor router, but a service
powered by Commtouch. If you want to use such service (trial or formal edition), you
have to perform the procedure of activation first. For the service of formal edition, please
contact with your dealer for detailed information.
Service Activation Wizard is a tool which allows you to use trial version or update the
license of WCF directly without accessing into the server (
MyVigor
) located on
. For using Web Content Filter Profile, please refer to section
Web Content Filter Profile
for detailed information.
Now, please follow the steps listed below to activate WCF feature for your router.
1. Open
Service Activation Wizard
.
2.
The screen of
Service Activation Wizard
will be shown as follows. Choose the one
you need and click
Next
. In this case, we choose to activate free trail edition.
Free trial edition
: it offers a period of trial for you to get acquainted with WCF
function.
Formal edition with license key
: you can extend the license valid time manually.
Note:
If you activate
Formal edition with license key
first, the free trial edition will
be invalid.
Page 38 / 335
Vigor2710 Series User’s Guide
26
3.
In the following page, you can activate the Web content filter service at the same time
or individually. When you finish the selection, please click
Next
.
Commtouch is the web content filter based on Commtouch operated in the worldwide.
There is a 30-day trial period. After trial, you can purchase DrayTek's prepared
Commtouch GlobalView WCF package from DrayTek dealer.
4.
Setting confirmation page will be displayed as follows, please click
Next
.
5.
Wait for a moment till the following page appears.
When such page appears, you can enable or disable these services for your necessity.
Then, click
Finish.
Page 39 / 335
Vigor2710 Series User’s Guide
27
Note:
The service will be activated and applied as the default rule configured in
Firewall>>General Setup
.
6.
Now, the web page will display the service that you have activated according to your
selection(s). The valid time for the free trial of these services is one month.
Later, if you need to extend the license valid time, you can also use the
Service Activation
Wizard
again
to reach your goal by clicking the radio button of
Formal edition with license
key
and clicking
Next.
Page 40 / 335
Vigor2710 Series User’s Guide
28
Check the box of
“I have read and accept the above..”
and click
Next.
Follow the
on-screen instruction to install the formal edition of WCF license.
2.6 Online Status
2.6.1 Physical Connection
Such page displays the physical connection status such as LAN connection status, WAN
connection status, ADSL information, and so on.
If you select
PPPoE
as the protocol, you will find out a link of
Dial PPPoE
or
Drop PPPoE
in the Online Status web page.
Online status for PPPoE
Online status for Static IP

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top