Vigor2130 Series User’s Guide

8

1.3 Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1.

Connect Line port to land line jack with a RJ-11 cable (Vn model).

2.

Connect this device to a modem with an Ethernet cable.

3.

Connect one port of 4-port switch to your computer with a RJ-45 cable. This device

allows you to connect 4 PCs directly.

4.

Connect Phone port to a conventional analog telephone.

5.

Connect detachable antennas to the router for Vigor2130 series (n model).

6.

Connect one end of the power cord to the power port of this device. Connect the other

end to the wall outlet of electricity.

7.

Power on the router.

8.

Check the

ACT

and

WAN

,

LAN

LEDs to assure network connections.

(For the detailed information of LED status, please refer to section 1.1.)

Caution

:

1. Each of the Phone ports can be connected to an analog phone only. Do not connect the

phone ports to the land line jack. Such connection might damage your router.

2. When the power is shutdown, VoIP phone will be disconnected. However, a phone set

connected to Phone 2 port can be used as the traditional telephone for the line will be

guided to land line jack via the router (loop through).

Vigor2130 Series User’s Guide

9

Stand Installation

The Vigor2130 must be placed erectly. Therefore you have to install a stand onto the router to

make it standing firmly. Please follow the figures listed below to finish the installation.

c

d

e

f

Vigor2130 Series User’s Guide

10

1.4 Printer Installation

You can install a printer onto the router for sharing printing. All the PCs connected this router

can print documents via the router. The example provided here is made based on Windows

XP/2000. For Windows 98/SE/Vista, please visit

www.draytek.com

.

Before using it, please follow the steps below to configure settings for connected computers

(or wireless clients).

1.

Connect the printer with the router through USB/parallel port.

2.

Open

Start->Settings-> Printer and Faxes

.

3.

Open

File->Add a New Computer

. A welcome dialog will appear. Please click

Next

.

Vigor2130 Series User’s Guide

11

4.

Click Local printer attached to this computer and click Next.

5.

In this dialog, choose

Create a new port Type of port

and use the drop down list to

select

Standard TCP/IP Port

. Click

Next

.

Vigor2130 Series User’s Guide

12

6.

In the following dialog, type

192.168.1.1

(router’s LAN IP) in the field of

Printer Name

or IP Address

and type

IP_192.168.1.1

as the port name. Then, click

Next

.

7.

Click Standard and choose Generic Network Card.

8.

Then, in the following dialog, click

Finish

.