DG-BR4015N User Manual

41

2-6-1 IP Address (UPnP)

In this section you can configure LAN parameters.

Please click ‘

IP Address (UPnP)

’ menu on the left of web management interface, under

the ‘

Network

’ tab and the following screen will be displayed on your web browser.

Here are descriptions of every setup item:

Parameter

Description

IP address

Please input the IP address of this router.

Subnet Mask

Please input subnet mask for this network.

Default Gateway

Please input default gateway for this network.

Primary DNS

Please input the primary DNS address for this network.

Secondary DNS

Please input the secondary DNS address for this network.

MAC Address

Shows the Router LAN MAC address.

DG-BR4015N User Manual

42

DHCP Type

Assign IP address dynamically to the DHCP clients. Default is

Enabled.

Start IP Address

Please input the Start IP address for this network.

End IP Address

Please input the End IP address for this network.

Subnet Mask

Please input subnet mask for this network.

Primary DNS

Please input the primary DNS address for this network.

Secondary DNS

Please input the secondary DNS address for this network.

Default Gateway

Please input default gateway for this network.

Lease Time

Enter the lease time for DHCP clients.

Spanning Tree

Enable 802.1d to start spanning tree function. Default is Disabled.

LLTD

LLTD is used by to display a graphical representation of the local area

network (LAN) or wireless LAN (WLAN), to which the computer is

connected. Default is Disabled.

UPnP

UPnP enabled clients are discovered dynamically. Default is Disabled.

DNS Proxy

Enable the DNS Proxy that will relay users’/clients’ DNS requests to a

real DNS server IP address. Users no need to specify real DNS server

IP address. Default is Enabled.

When you finish with all settings, please click ‘

Apply

’ button to continue with other

setup procedures.

Recommended Value if you don’t know what to fill:

IP Address: 192.168.2.1

Subnet Mask: 255.255.255.0

802.1d Spanning Tree: Disabled

DHCP Server: Enabled

DG-BR4015N User Manual

43

2-6-2 Statistics

Here you can view the statistics of 3G router such as memory statistics, WAN/LAN Tx

and Rx and all interface statistics.

Please click ‘

Statistic

’ menu on the left of web management interface, under the

‘

Network

’ tab and the following screen will be displayed on your web browser.

DG-BR4015N User Manual

44

2-6-3 DHCP Client List

Here you can view the DHCP clients connected to the router.

Please click ‘

DHCP Clients

’ menu on the left of web management interface, under the

‘

Network

’ tab and the following screen will be displayed on your web browser.

2-7 WIRELESS

The wireless settings can be quickly configured as a wireless access point for roaming

client by setting the access identifier (Network name) and channel number. It also

supports data encryption and client filtering. The Wireless Settings contains the following

sections:

±

Basic

±

Advanced

±

Wireless Security

±

WPS

±

WDS

±

AP Clients List

±

Statistics

DG-BR4015N User Manual

45

2-7-1 Basic Wireless Setting

This function allows you to define SSID, and Channel for the wireless connection. These

parameters are used for the wireless stations to connect to the Access Point. Click ‘

Basic’

under Wireless, below screen will prompt for Basic Setting.

Here are the descriptions of every setup item:

Parameter

Description

RADIO ON / OFF

RADIO indicates the wireless operating status. The wireless

can be turned ON or OFF. When the radio is ON, the

following parameters are in effect.

WIFI ON / OFF

Similar to RADIO ON / OFF. Wireless can be turned ON or

OFF.

Network Mode

If all of the wireless devices you want to connect with this

router can connect in the same transmission mode, you can

improve performance slightly by choosing the appropriate

wireless mode. If you have some devices that use a different

transmission mode, choose the appropriate wireless mode.

There are many different configuration options available to

choose from. Use the drop down list to select the wireless

mode.