38

DHCP

The DHCP Table lists the DHCP lease information for all IP addresses assigned by the DHCP

server in the device.

IP Address:

The IP address which is assigned to the host with this MAC address.

MAC Address:

The MAC Address of internal DHCP client host.

Host Name:

The Host Name of DHCP client.

Register Information:

Show the remaining time information during registration.

39

Quick Start

This part is to let you quickly configure and start your router to access internet.

1.

To configure DSL,

press

Continue

to go on to next step, or if you only want to configure Wireless,

press

Jump to Wireless setting

to go to step 8.

2.

When ADSL line is not ready, the screen1 below will appear to remind you. Then you should

connect the ADSL line. While ADSL line is ready, the screen 2 below will appear to let you go on.

Here you can select Auto or Manually. Select Auto will go to step 3, and select manually will go to

step 4.

Screen 1

Screen 2

40

3.

Here wait while the DSL is scanning, when the scanning is OK, the scanning result will appear,

see screen 3, and then it will quickly goes to step 6. Or you can

Abort to manually setting

to step 4.

Screen 3

4.

Here you should select the Layer2 Interface. ATM and PTM are two kinds of transmission mode.

You can select according to your ISP. Select ATM for example. Click

Add

to add WAN Interface.

5.

Enter the VPI/VCI from your ISP.

41

6.

Enter the username, password from your ISP, for IP and DNS settings, also refer to your ISP.

Here IPv6 service is enabled by default.

7.

Wait while the device is configured.

8.

WAN port configuration is success.

42

9.

After the configuration is successful, click

Next to Wireless

button and you may proceed to

configure the Wireless setting. For security information, please turn to

wireless>security

section in

this manual for help.

10.

Configuration’s success.

Then you successfully quick configured your router and can access the internet, turn to Device Info,

you will see the basic information.

For more information, turn to

Advanced setup

for help.