Bandluxe R300 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 65 Scroll up to view Page 1 - 5

Package Contents

5

7

Power Receptor

Receptor for the Power Adaptor.

8

UMTS LED

Reference below table.

9

Roaming LED

Solid light shows the Router is connecting to

Roaming network.

10

WLAN LED

Solid light indicates that the wireless segment is

ready.

Flashing light shows that data is being

transmitted via WLAN.

11

Ethernet LED

Solid light shows that an Ethernet-enabled

computer is connected via the LAN port but no

data is being transmitted.

Flashing light shows that data is being

transmitted via LAN.

12

DIAG LED

Reference below table.

13

Power LED

Solid light indicates that the power supply is

connected properly.

14

3G Radio On/Off &

Signal Strength

Button

Short press – Enable Signal Strength indication

for 3 sec.

Long press (>5 sec) – 3G radio on/off

15

3G Radio Signal

Strength Indicator

Indicates the 3G signal strength when 3G Radio

button is in short press.

Table for UMTS and DIAG LED:

Operation status

UMTS

DIAG

Error in Router

OFF

Solid

Fail to boot module

Solid Red

Flashing

No SIM exist

Flashing Red

OFF

Waiting for PIN entering

Flashing Red

OFF

No network/Searching for network

Flashing Red

OFF

3G camped

Flashing Green/Pink

OFF

3G connected

Solid Blue/Green/Pink

OFF

Note: Pink for UMTS LED is available by product if 2G is available.

Page 7 / 65

Installation

6

Installation

1.

Connect the power adaptor to the Router and connect it to an outlet.

2.

Insert your SIM card into the slot on the Router, making sure the SIM

card orientation matches the SIM card slot, as shown in the picture.

3.

Turn on the Power switch.

Page 8 / 65

Installation

7

4.

One of the following two methods can be chosen to link your Router

with PC.

A.

To link the Router with your PC via WiFi, in Microsoft Windows, go to

Control Panel

>

Network Connections

, right-click on

Wireless

Network Connection

, and choose

View Available Wireless

Networks

. Select the

HSPA_ROUTER

wireless network, and click

Connect

.

B.

To link the Router with your PC via Ethernet cable, connect one end

of the cable to the LAN port on the Router, and the other end of the

cable to the Ethernet port on your computer.

.

Note:

If you choose to access the Internet via Ethernet,

connect one end of the cable to the WAN port of Router, and

the other end to your xDSL/Cable Modem.

The

Router uses a web-based configuration utility. To access the

configuration utility, open a browser (for example Internet Explorer) and

enter the IP address (

http:

//

192.168.1.1

) or the URL

Page 9 / 65

Installation

8

(

http://R300.ROUTER

)

for the Router in your browser’s address bar.

Enter the Router User name (

admin

) and Password (

hsparouter

).

Page 10 / 65

Wizard Setup

9

Wizard Setup

User can set preferred settings step by step via Wizard. If the router is in

Factory default settings, the GUI will always open Wizard. User can set

the Wizard via Basic Setting> Network Setting > Basic WiFi Network >

WiFi Security.

Rate

Popular Bandluxe Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share