WEP:

Open System and Shared Key requires the user to set a WEP key to exchange data with other wireless clients that

have the same WEP key.

WEP Key Format:

Select the key format from the drop-down list HEX or ASCII.

WEP Key Length:

Select the level of encryption from the drop-down list. The WLAN Router supports, 64 and 128-bit

encryption.

WEP Key 1 ~ 4:

Enables users to create up to 4 different WEP keys. Manually enter a set of values for each key. Select

a key to use by clicking the radio button next to the key. Click “Clear” to erase key values.

WPA-PSK / WPA2-PSK

Figure 44.

Figure 45

If WPA or WPA2

PSK

is selected, the above screen is shown.

Encryption Type:

Select the encryption type for TKIP or AES encryption.

Passphrase:

The length should be 8 characters at least.

AirLive WL-1500R User’s Manual

33

WPA / WPA2

Figure 46.

Figure 47

If WPA or WPA2

EAP

is selected, the above screen is shown.

Please set the length of the encryption key and the

parameters for the RADIUS server.

Encryption Type:

Select the encryption type for TKIP or AES encryption.

RASIUS Server:

Enter the IP address, Port used and Shared Secret by the Primary Radius Server.

Enter the IP address, Port used and Shared Secret by the Secondary Radius Server. (optional)

AirLive WL-1500R User’s Manual

34

Advanced

This function enables user to configure advanced wireless functions.

Figure 48.

Beacon Interval:

Type the beacon interval in the text box. User can specify a value from 20 to 1000. The default beacon

interval is 100.

RTS Threshold:

Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is

irregular, choose values between 256 and 2346 until data flow is normalized.

Fragmentation Threshold:

Type the fragmentation threshold in the text box. If packet transfer error rates are high,

choose values between 1500 and 2346 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold

value may diminish system performance.)

DTIM Interval:

Type a DTIM (Delivery Traffic Indication Message) interval in the text box. User can specify a value

between 1 and 255. The default value is 1.

TX Rates:

Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the

speed of wireless adapters connected to the WLAN.

AirLive WL-1500R User’s Manual

35

LAN Setting

The function enables user to configure the LAN port IP address & DHCP Server.

Basic

This page leads to set LAN port properties, such as the host name, IP address, and subnet mask.

Figure 49.

Host Name:

Type the host name in the text box. The host name is required by some ISPs. The default host name is

"Wireless Router"

IP Address:

This is the IP address of the router. The default IP address is 192.168.1.1.

Subnet Mask:

Type the subnet mask for the router in the text box. The default subnet mask is 255.255.255.0.

DHCP

Figure 50.

AirLive WL-1500R User’s Manual

36

AirLive WL-1500R User’s Manual

37

DHCP Server:

Enables the DHCP server to allow the router to automatically assign IP addresses to devices connecting

to the LAN. DHCP is enabled by default.

DHCP Server Start IP:

Type an IP address to serve as the start of the IP range that DHCP will use to assign IP

addresses to all LAN devices connected to the router.

DHCP Server End IP:

Type an IP address to serve as the end of the IP range that DHCP will use to assign IP addresses

to all LAN devices connected to the router.

Lease Time:

The lease time specifies the amount of connection time a network user be allowed with their current

dynamic IP address.

Add Static DHCP:

Selected

Enable the Static DHCP allows you to assign a static IP address to the PC that has the IP

address and MAC address mapping set in the Static DHCP List.

Static DHCP List:

The static DHCP mapping will list in the table, providing the Host Name, MAC Address and IP Address.

Dynamic DHCP List:

All dynamic DHCP client computers are listed in the table and providing the Host name, IP address,

and MAC address and Expired Time of the client.