Linksys WRT54GP2A-AT Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys WRT54GP2A-AT router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 86
A Division of Cisco Systems, Inc.
®
Model No.
Broadband Router
Wireless-
G
WRT54GP2A-AT
User Guide
WIRELESS
GHz
2.4
802.11g
with 2 Phone Ports
Page 2 / 86
Wireless-G Broadband Router with 2 Phone Ports
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All
rights reserved. Other brands and product names are trademarks or registered trademarks of their respective
holders.
How to Use this Guide
Your guide to the Wireless-G Broadband Router with 2 Phone Ports has been designed to make understanding
networking with the Router easier than ever. Look for the following items when reading this User Guide:
In addition to these symbols, there are definitions for technical terms that are presented like this:
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure numbers and descriptions can also be found in the “List of Figures” section.
This exclamation point means there is a caution or
warning and is something that could damage your
property or the Router.
word:
definition.
This checkmark means there is a note of interest and
is something you should pay special attention to while
using the Router.
This question mark provides you with a reminder about
something you might need to do while using the Router.
Figure 0-1: Sample Figure Description
WRT54GP2A-AT-UG-40907A JL
WARNING:
This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm.
Wash hands after handling.
Page 3 / 86
Wireless-G Broadband Router with 2 Phone Ports
Table of Contents
Chapter 1: Introduction
1
Welcome
1
What’s in this Guide?
2
Chapter 2: Planning Your Wireless Network
4
Network Topology
4
Ad-Hoc versus Infrastructure Mode
4
Network Layout
5
Chapter 3: Getting to Know the Router
6
The Back Panel
6
The Front Panel
7
Chapter 4: Connecting the Router
8
Overview
8
Connecting the Router to Your Broadband Modem
8
Connecting One Router to Another
9
Chapter 5: Configuring the Router
11
Overview
11
How to Access the Web-based Utility
13
The Setup Tab - Basic Setup
13
The Setup Tab - DDNS
18
The Setup Tab - MAC Address Clone
19
The Wireless Tab - Basic Wireless Settings
20
The Wireless Tab - Wireless Security
21
The Wireless Tab - Wireless MAC Filter
23
The Wireless Tab - Advanced Wireless Settings
24
The Security Tab - Firewall
25
The Security Tab - VPN
26
The Access Restrictions Tab - Internet Access
27
The Applications & Gaming Tab - Port Range Forward
29
The Applications & Gaming Tab - Port Trigger
30
The Applications & Gaming Tab - UPnP Forward
31
The Applications & Gaming Tab - DMZ
33
The Administration Tab - Management
34
Page 4 / 86
Wireless-G Broadband Router with 2 Phone Ports
The Administration Tab - Log
36
The Administration Tab - Diagnostics
37
The Administration Tab - Factory Defaults
38
The Administration Tab - Backup and Restore
39
The Administration Tab - Reboot
39
The Status Tab - Router
40
The Status Tab - Local Network
41
The Status Tab - Wireless
42
The Status Tab - Voice
43
Chapter 6: Signing up for AT&T CallVantage
sm
Service
44
Overview
44
Instructions
44
Appendix A: Troubleshooting
45
Common Problems and Solutions
45
Frequently Asked Questions
55
Appendix B: Wireless Security
59
Security Precautions
59
Security Threats Facing Wireless Networks
59
Appendix C: Windows Help
62
Appendix D: Finding the MAC Address and IP Address for Your
Ethernet Adapter
63
Windows 98 or Me Instructions
63
Windows 2000 or XP Instructions
63
For the Router’s Web-based Utility
64
Appendix E: Glossary
65
Appendix F: Specifications
72
Appendix G: Warranty Information
74
Appendix H: Regulatory Information
75
Appendix I: Contact Information
77
AT&T
77
Linksys
77
Page 5 / 86
Wireless-G Broadband Router with 2 Phone Ports
List of Figures
Figure 3-1: Back Panel
6
Figure 3-2: Front Panel
7
Figure 4-1: Connect the Broadband Modem
8
Figure 4-2: Connect a Telephone
8
Figure 4-3: Connect a PC
8
Figure 4-4: Connect the Power
8
Figure 4-5: Router Connected to Another Router
9
Figure 4-6: Connect the Broadband Modem
10
Figure 4-7: Connect a Telephone
10
Figure 4-8: Connect the Other Router
10
Figure 4-9: Connect the Power
10
Figure 5-1: Router’s IP Address
13
Figure 5-2: Router Login
13
Figure 5-3: Setup Tab - Basic Setup - Automatic Configuration (DHCP)
13
Figure 5-4: Static IP
14
Figure 5-5: PPPoE
14
Figure 5-6: PPTP
15
Figure 5-7: Setup Tab - DDNS (DynDNS.org)
18
Figure 5-8: Setup Tab - DDNS (TZO.com)
18
Figure 5-9: Setup Tab - MAC Address Clone
19
Figure 5-10: Wireless Tab - Basic Wireless Settings
20
Figure 5-11: Wireless Tab - Wireless Security (WPA Pre-Shared Key)
21
Figure 5-12: Wireless Tab - Wireless Security (WPA RADIUS)
21
Figure 5-13: Wireless Tab - Wireless Security (RADIUS)
22
Figure 5-14: Wireless Tab - Wireless Security (WPA RADIUS)
22
Figure 5-15: Wireless Tab - Wireless MAC Filter
23
Figure 5-16: MAC Address Filter List
23
Figure 5-17: Wireless Client MAC List
23

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top