1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. SPA-400

Linksys SPA-400 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys SPA-400 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 8
Linksys SPA400
Trixbox Integration Guide
Access Point – Connecting You & Your Customers.
Contact :
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 8
Overview:
The Linksys SPA400 is a 4 Line FXO gateway capable of connecting 4
PSTN lines to your asterisk system to make and receive calls.
This
guide is a step by step on how to configure Trixbox to utilize the
features of the SPA400. Limitations:
* The voicemail function of the SPA400 cannot be used.
* You cannot select which line of the SPA400 to use. They are
treated as a single group of 1-4 lines.
The SPA400 will know
which lines are available by the line voltage when plugged in.
Configure the SPA400:
Step 1 – Obtain the IP address if the SPA400
Option 1(Easiest): You will need to check your DHCP server to see
what IP address has been allocated to the SPA400 (Will usually be in
the Status area of your Modem/Router).
Option 2(Harder): If you only have a few devices on your network
you can use angry IP scanner (
) which will
search your network for devices.
You should be able to work out the
SPA400 address. Try searching for port 5060 also to help identify.
Option 3: You can download the SPA9000 setup utility from
it will scan the network for SPA400s and show
the IP address.
Note the IP Address: ___________________________________
Step 2 – Access the SPA400
In your favourite web browser type the IP address of the SPA400, it
should ask for a username and password.
The
default username
is Admin (Note capital A)
The
default password
is
blank
Downloaded from
www.Manualslib.com
manuals search engine
Page 3 / 8
Step 3 – Set the SPA400 to a Fixed IP address
Asterisk needs to access your SPA400, so it needs to be set to a
fixed ip address.
To do this: -
Under Setup -> Basic Setup
•
Select Fixed IP address and enter a valid fixed IP address for
your network.
•
Be sure to enter a DNS server, if you do not know enter the
Telstra DNS server 139.130.4.5 – You can leave the secondary
blank
•
Set your time zone.
•
Click Save Settings
•
Restart System
Sample Config – Use Address Valid For Your Network
Check with the network administrator if unsure.
Note the IP address in the Notes Section.
Downloaded from
www.Manualslib.com
manuals search engine
Page 4 / 8
Step 4 – Setup the SPA400 Voice Configuration.
Open the SPA400 in your web browser using the new IP address.
Select Setup->SPA9000 Interface.
•
Enter SPA400 in the User ID:
•
Leave SPA9000 on discover automatically
•
No other changes should need to be made
•
Click Save Settings (You Do Not Need To Restart)
Screenshot of Setup -> SPA9000 Interface
Select Setup -> Voice
Downloaded from
www.Manualslib.com
manuals search engine
Page 5 / 8
For Australia you need to change:-
•
Impedance : 220 Ohms + (820 Ohms || 120nF)
•
On-Hook speed : 26ms
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top