13

Chapter 4 °

Set Up Internet Connection

2 )

If you choose

Static IP

, enter the information provided by your ISP in the corresponding fields.

3 )

If you choose

PPPoE

, enter the

username

and

password

provided by your ISP. PPPoE users usually have DSL cable.

14

Chapter 4 °

Set Up Internet Connection

4 )

If you choose

L2TP

, enter the

username

and

password

and choose the

Secondary Connection

provided by your ISP.

Different parameters are needed according to the Secondary Connection.

5 )

If you choose

PPTP

, enter the

username

,

password

and choose the

Secondary Connection

provided by your ISP.

Different parameters are needed according to the Secondary Connection.

5.

Click

Save

to make the settings take effect. To check your Internet connection, click

Network Map

on the left of the page.

Note:

It may take 1-2 minutes to make the settings valid.

6.

After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example.

15

Chapter 4 °

Set Up Internet Connection

Tips:

1.

If you use

Dynamic IP

and

PPPoE

and you are provided any other parameters that are not required on the page, please go to

Advanced

>

Network

>

Internet

to complete the configuration.

2.

If you still cannot connect to the Internet, refer to

Appendix B: FAQ

for further instructions.

4. 3.

Setting Up an IPv6 Internet Connection

In this part, you can set up an IPv6 Internet connection if your ISP supports it and has provided related parameters.

1.

Visit

http://tplinkwifi.net

, then log in with the username and password you set for the router.

2.

Go to

Advanced

>

IPv6

to log into the configuration page.

16

Chapter 4 °

Set Up Internet Connection

3.

Enable IPv6, and select the Internet connection type provided by your ISP.

Tips:

If you do not know what your Internet connection type is, contact your ISP or judge according to the information provided by your ISP.

4.

Fill in information provided by your ISP.

1 )

Static IP:

Fill in blanks. Click

Advanced

to have more configuration if your ISP requires. Click

Save

.

17

Chapter 4 °

Set Up Internet Connection

2 )

Dynamic IP:

Select the

Addressing Type

. Click

Advanced

to have more configuration if your ISP requires. Click

Save

.

3 )

PPPoE:

Fill in the Username and Password, and select the

Addressing Type

. Click

Advanced

to have more

configuration if your ISP requires. Click

Save

.