Page 26 / 127 Scroll up to view Page 21 - 25
NETGEAR genie Basic Settings
26
N900 Wireless Dual Band Gigabit Router WNDR4500v2
1.
On the Basic Home screen, select
Wireless
to display the Wireless Settings screen.
You can scroll down to view the 5 GHz wireless network settings. The screen sections,
settings, and procedures are explained in the following sections.
2.
Make any changes that are needed, and click
Apply
to save your settings.
3.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
Does your wireless device or computer show up on the Attached Devices screen? If it
does, it is connected to the network.
If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your router.
Wireless Settings Screen Fields
Region Selection
The location where the router is used. Select from the countries in the list. In the United
States, the region is fixed to United States and is not changeable.
Wireless Network
2.4 GHz b/g/n and 5.0 GHz a/n
The b/g/n and a/n notation references the 802.11 standards of conformance. For example,
the 2.4 b/g/n conforms to 802.11b, 802.11g, and 802.11n at 2.4-GHz radio frequency.
Page 27 / 127
NETGEAR genie Basic Settings
27
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Enable Wireless Isolation
. If this check box is selected, wireless clients (computers or
wireless devices) that join the network can use the Internet, but cannot access each other or
access Ethernet devices on the network.
Enable SSID Broadcast
. This setting allows the router to broadcast its SSID so wireless
stations can see this wireless name (SSID) in their scanned network lists. This check box is
selected by default. To turn off the SSID broadcast, clear the check box, and click
Apply
.
Name (SSID)
. The SSID is also known as the wireless network name. Enter a 32-character
(maximum) name in this field. This field is case-sensitive. The default SSID is randomly
generated, and
NETGEAR strongly recommends that you do not change this setting.
Channel
. This setting is the wireless channel used by the gateway. Enter a value from 1
through 13. (For products in the North America market, only Channels 1 through 11 can be
operated.) Do not change the channel unless you experience interference (shown by lost
connections or slow data transfers). If this happens, experiment with different channels to
see which is the best.
Mode
. Up to 217 Mbps is the default and allows 802.11n and 802.11g wireless devices to join
the network. g & b
supports up to 54 Mbps. The Up to 450-Mbps setting allows 802.11n
devices to connect at this speed.
Security Options Settings
The Security Options section of the Wireless Settings screen lets you change the security
option and passphrase.
NETGEAR recommends that you do not change the security
option or passphrase
,
but if you want to change these settings, this section explains how.
Do not disable security
.
Change WPA Security Option and Passphrase
1.
Under Security Options, select the WPA option you want.
2.
In the Passphrase field that displays when you select a WPA security option, enter the
network key (passphrase) that you want to use. It is a text string from 8 to 63 characters.
Page 28 / 127
NETGEAR genie Basic Settings
28
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Guest Networks
Adding a guest network allows visitors at your home to use the Internet without giving them
your wireless security key. You can add a guest network to each wireless network: 2.4 GHz
b/g/n and 5.0 GHz a/n.
To set up a guest network:
1.
Select
Basic >
Guest Network
:
2.
For a 5-GHz network, scroll down to view that section of the Guest Network screen.
3.
Select any of the following wireless settings:
Enable Guest Network
. When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
Enable Wireless Isolation
. If this check box is selected, wireless clients (computers or
wireless devices) that join the network can use the Internet, but cannot access each other
or access Ethernet devices on the network.
Enable SSID Broadcast
. If this check box is selected, the wireless access point
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt the
correct SSID for connections to this access point.
Allow guest to access My Local Network
. If this check box is selected, any user who
connects to this SSID has access to your local network, not just Internet access.
4.
Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the wireless devices in your network to use the guest network name in
addition to the main nonguest SSID.
5.
Select a security option from the list. The security options are described in
Guest Network
Wireless Security Options
on page
29.
6.
Click
Apply
to save your selections.
Page 29 / 127
NETGEAR genie Basic Settings
29
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Guest Network Wireless Security Options
A security option is the type of security protocol applied to your wireless network. The
security protocol in force encrypts data transmissions and ensures that only trusted devices
receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several
options including pre-shared key (PSK) encryption.
This section presents an overview of the security options and provides guidance on when to
use which option. It is also possible to set up a guest network without wireless security.
NETGEAR does
not
recommend this.
WPA Encryption
WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means
that the product is authorized by the Wi-Fi Alliance (
) because it complies
with the worldwide single standard for high-speed wireless local area networking.
WPA uses a passphrase to authenticate the client and generate the initial data encryption
keys. Then it dynamically varies the encryption key. WPA-PSK uses Temporal Key Integrity
Protocol (TKIP) data encryption, implements most of the IEEE 802.11i standard, and is
designed to work with all wireless network interface cards, but not all wireless access points.
It is superseded by WPA2-PSK.
WPA2-PSK is stronger than WPA-PSK. It is advertised to be theoretically indecipherable due
to the greater degree of randomness in encryption keys that it generates. WPA2-PSK gets
higher speed because it is typically implemented through hardware, while WPA-PSK is
typically implemented through software. WPA2-PSK uses a passphrase to authenticate and
generate the initial data encryption keys. Then it dynamically varies the encryption key.
WPS-PSK + WPA2-PSK Mixed Mode can provide broader support for all wireless clients.
WPA2-PSK clients get higher speed and security, and WPA-PSK clients get decent speed
and security. The product documentation for your wireless adapter and WPA client software
should have instructions about configuring their WPA settings.
Page 30 / 127
30
4
4.
NETGEAR genie Advanced Home
Specifying custom settings
This chapter explains the features available from the NETGEAR genie Advanced Home screen,
shown in the following figure:
This screen is also
displayed through the
Administration menu.
This chapter contains the following sections:
Setup Wizard
WPS Wizard
Setup Menu
WAN Setup
LAN Setup
Quality of Service (QoS) Setup
Some selections on the Advanced Home screen are described in separate chapters:
USB Storage
. See
Chapter 5, USB Storage
.
Security
. See
Chapter 7, Security
.
Administration
. See
Chapter 8, Administration
.
Advanced Setup
. See
Chapter 9, Advanced Settings
.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top