19216811.liveQUICK INSTALLATION GUIDE
Part No. HAWNR1
Hi-Gain
TM
Wireless-150N Router with Range Amplifier
Technical Support: 1.888.202.3344
or
www.hawkingtech.com
•1x Setup CD-ROM
•1x Quick Installation Guide (QIG)
•1x Ethernet Cable
Start
Here
1
Check Package Contents & Requirements
Package Contents
•1x Wireless-150N Router
with Range Amplifier
•1x Power Adapter
•2x Dipole Antennas
Requirements
• Internet Access
• PC/Mac Computer
• Power Outlet
2
Overview
3
Connecting the Router (to a Mac or PC)
4a
Configuring the Router with a PC
(for configuring with a Mac, see Step 4b)
1.) Connect the A/C power adapter to
an electrical source, and then connect it
to the ‘Power’ socket of the router.
3.) Connect your PC or Mac to any of the 4
LAN ports located on the back of the router.
Example
PC Rear Ports
PC Symbol for Ethernet Port
Broadband Modem
Power Adapter
Example
Mac Rear Ports
Mac Symbol for Ethernet Port
1.) Insert the Setup CD into the
CD-ROM drive.
2.) When the auto-load page
appears, click the Setup Wizard
option on the right and follow the
Setup directions.
3.) Scan for your router by clicking the
‘Search’ button. Once found, click the
device to highlight it and click ‘Next’.
4.) Select your Internet Service Provider
(ISP) from the list that appears. Then
click ‘Next’. Complete the information
requested for your Internet type in the
following pages.
5.) Here, you can adjust your LAN IP
settings. It is recommended, however,
that you DO NOT change your LAN IP.
You may also change your password
login (default:1234) settings here.
PC
Mac
2.) Connect your Broadband Modem to the
Router’s “MODEM” port with an Ethernet
cable. Reset your modem by unplugging it
and plugging it back in.
BACK PANEL DESCRIPTION
LED DESCRIPTION
HAWNR1 Hi-Gain Wireless-150N Router
with Range Amplifier
Internet Connection
LED is on, when there is an established connection with a cable/DSL modem.
LAN Ports (1-4)
LED is on, when a connection (with the specific port) between a PC and the router/network is detected.
Wireless
LED is on, (blinking) when wireless data activity is detected.
Power
LED is on, when the power adapter is connected and plugged in to an outlet.
Removable Antennas
Removable Omni-Directional Antennas
Modem Port
For connecting directly to your Broadband Modem’s Ethernet port
LAN Ports
Connects your wired network devices and computers to your network
Reset Switch / WPS
Resets your router to its default settings / initiates WPS Setup
Wireless Radio On/Off Switch
Turns off the wireless functions
Power
Power Adapter Plug