Page 36 / 62
Scroll up to view Page 31 - 35
Cipher Type:
Select the cipher type for TKIP or AES encryption, Selected Auto
for auto detects the cipher type.
RASIUS Server:
1.
Enter the IP address, Port used and Shared Secret by the Primary Radius
Server.
2.
Enter the IP address, Port used and Shared Secret by the Secondary Radius
Server. (optional)
- 30 -
Page 37 / 62
Advanced
This function enables user to configure advanced wireless functions.
Wi-Fi Protected Setup
This screen enables users to configure the Wi-Fi Protected Setup function.
WPS:
Enable or Disable the WPS (Wi-Fi Protected Setup) function
Status:
Display the state (Un-configured State/Configured State) information of
WPS.
Self-PIN Number:
Display the default PIN number of WLAN Router.
Client PIN Number:
Type Client PIN number the client uses to negotiate with
WLAN Router via WPS protocol. It is only used when users want their station to
join Router's network.
- 31 -
Page 38 / 62
Push Button Configuration:
Clicking this button will invoke the Push Button
Configuration (PBC) method of WPS. It is only used when WLAN Router acts as a
Registrar.
- 32 -
Page 39 / 62
LAN Setting
The function enables user to configure the LAN port IP address & DHCP Server.
Basic
This page leads to set LAN port properties, such as the host name, IP address, and
subnet mask.
Host Name:
Type the host name in the text box. The host name is required by
some ISPs. The default host name is "
ENHWI-N"
IP Address:
This is the IP address of the router. The default IP address is
192.168.1.1.
Subnet Mask:
Type the subnet mask for the router in the text box. The default
subnet mask is 255.255.255.0.
- 33 -
Page 40 / 62
DHCP
DHCP Server:
Enables the DHCP server to allow the router to automatically
assign IP addresses to devices connecting to the LAN. DHCP is enabled by default.
DHCP Server Start IP:
Type an IP address to serve as the start of the IP range that
DHCP will use to assign IP addresses to all LAN devices connected to the router.
DHCP Server End IP:
Type an IP address to serve as the end of the IP range that
DHCP will use to assign IP addresses to all LAN devices connected to the router.
Lease Time:
The lease time specifies the amount of connection time a network
user be allowed with their current dynamic IP address.
Add Static DHCP:
Selected
Enable the Static DHCP allows you to assign a static
IP address to the PC that has the IP address and MAC address mapping set in the
Static DHCP List.
Static DHCP List:
The static DHCP mapping will list in the table, providing the
Host Name, MAC Address and IP Address.
Dynamic DHCP List:
All dynamic DHCP client computers are listed in the table
and providing the Host name, IP address, and MAC address and Expired Time of
the client.
- 34 -
19216811.live