Given below is full router user manual of D-Link DVG-1120M router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 36
VoIP Residential Gateway
Manual
(10/08/04)
Building Networks for People
D-Link
DVG-1120M
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 36
2
Contents
Package Contents
................................................................................
3
Introduction
............................................................................................
4
Connections
..........................................................................................
5
Features and Benefits
...........................................................................
6
LEDs
....................................................................................................
7
Web-based Management
......................................................................
8
Technical Specifications
......................................................................
29
Technical Support
................................................................................
32
Warranty
..............................................................................................
33
Registration
........................................................................................
36
Downloaded from
www.Manualslib.com
manuals search engine
Page 3 / 36
3
Contents of Package:
D-Link DVG-1120M
VoIP Residential Gateway
A/C Power Adapter
CAT5-RJ-45
Ethernet Cable (Blue)
RJ-11 Telephone Cord (Gray)
Quick Installation Guide
Package Contents
±
±
±
±
Note: Using a power supply with a different voltage rating than the one included with
the DVG-1120M will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
System Requirements For Configuration:
±
At least 128MB of memory and a 500MHz processor
±
Computer with Windows, Macintosh, or Linux-based operating
system with an installed Ethernet adapter
Internet Explorer or Netscape Navigator version 4.0 or above,
with JavaScript enabled
±
±
Downloaded from
www.Manualslib.com
manuals search engine
Page 4 / 36
4
Introduction
The D-Link DVG-1120M VoIP Station Gateway links traditional telephone networks
to IP networks with conventional telephone devices such as analog phones or
fax machines.
The DVG-1120M includes two Foreign Exchange Subscriber (FXS) interfaces
with normal RJ-11 telephone connectors that provide voice/fax communication
over the IP network.
Two Ethernet ports are also provided. One Ethernet port is for a DSL/Cable
Modem or other WAN device, and the other is for connection to create a home
or small office LAN network.
The built-in DHCP server and Network
Address Translation (NAT) function
automatically assigns IP addresses for LAN users, allowing multiple users to
share a single Internet connection. You can configure and monitor the DVG-
1120M via the Web browser. Telnet and SNMP management is also supported.
By routing calls over the Internet or any IP network, the DVG-1120M can reduce
or eliminate long distance or inter-office phone charges. Corporations can also
enjoy the benefits of network consolidation and reduction of leased lines by
relying on the Internet service providers to deliver toll-quality voice
communications over the IP networks.
Downloaded from
www.Manualslib.com
manuals search engine
Page 5 / 36
5
Connections
AC Power Connector
Use the
included power adapter. If you use
a power adapter other than the
one included with the product you
will damage the device and void
the warranty on this product.
PSTN/VoIP
Switch
to
select PSTN
or VoIP mode
When the
switch is in
the down
position,
Phone1/2 will
be in VoIP
Mode.
When the
switch is in
the up
position,
Phone1/2 will
be configured
to PSTN
Mode.
Reset Switch
Used to return the device
to its original configuration. This is the
same as performing a factory reset.
Diagnostic Port
An RJ-14
port used to configure the
device. (User needs a RJ-
14 to RS-232 converter).
Plug one end of a straight-
through wired RJ-14 cable
to the device and the other
end to a serial port of a PC
running a terminal
emulation program (such
as Microsoft HyperTerminal)
or a VT-100 terminal.
Phone 1
Normal RJ-11 phone
jack used to connect
to a telephone or fax
machine. Plug your
normal telephone or
fax machine directly
into this jack.
Ethernet WAN
A 10Mbps
Ethernet port
fitted with an
RJ-45
connector used
to connect the
VoIP gateway
to a WAN
device (e.g.
Cable/ADSL
Modem). This
port accepts
Category 3, 4
or 5 UTP
cabling with an
RJ-45
connector.
Ethernet LAN
A 10/100Mbps
dual-speed
Ethernet port
fitted with an
RJ-45
connector used
to connect the
VoIP gateway to
a LAN device
(hub, switch,
PC, etc.). This
port accepts
Category 5 or
better UTP
cabling with an
RJ-45
connector.
Warning!
Using a different power adapter than the
one included with your purchase will damage the
DVG-1120M and void the warranty.
2
1
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live