1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DGS-1216T

D-Link DGS-1216T Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of D-Link DGS-1216T router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 10
Before Your Begin
This Quick Installation Guide gives step-by-step instructions for setting up the D-Link
DGS1216T Gigabit Smart Switch. The model you have purchased may appear slightly
different from those shown in the illustrations. For more detailed information about the
switch, its components, making network connections and technical specifications,
please refer to the User’s Manual on master CD included with your switch.
Check Your Package Contents
These are the items included with your DGS-1216T purchase:
If any of the above items are missing, please contact your reseller.
©2006 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice.
•
DGS-1216T
D-Link 16-Port 10/100/1000Mbps + 2 Combo
Mini GBIC Gigabit Smart Switch
• CD-ROM (containing Manual and Utility
Installation)
• 100–240VAC 50/60Hz
Power Adapter
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
DGS-1216T
D-Link 16-Port
10/100/1000Mbps + 2 Combo
Mini GBIC Gigabit
Smart Switch
Page 2 / 10
2
Setup The DGS-1216T Gigabit Smart
Switch
The setup of the Switch can be performed using the following steps:
A.
Install the DGS-1216T in a fairly cool and dry place. See Technical
Specification for the acceptable operation temperature and humidity
ranges.
B.
Install the DGS-1216T in a site free from strong electromagnetic
field generators (such as motors), vibration, dust, and direct
exposure to sunlight.
C.
Leave at least 10cm (about 4 inches) of space at the front and rear
of the hub for ventilation.
D.
Visually inspect the DC power jack and make sure that it is fully
secured to the power adapter.
E.
Install the DGS-1216T on a sturdy, level surface that can support
its weight, or in an EIA standard-size equipment rack.
F.
When installing the Switch on a level surface, attach the rubber feet
to the bottom of each device.
The rubber feet cushion the hub and
protect the hub case from scratching.
Attach the adhesive rubber pads to the bottom
Rack Mounting
The DGS-1216T can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipments.
Attach the
mounting brackets to both sides of the Switch (one at each side), and
secure them with the provided screws.
Use the screws provided. Then, use screws provided with the
equipment rack to mount the Switch in the rack.
Page 3 / 10
3
Mount the Switch in the rack
Connecting Network Cable
The DGS-1216T supports 10/100/1000Mbps Gigabit Ethernet. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex transfer
mode for 1000Mbps. Each port on the DGS-1216T supports Auto-
MDI/MDI-X. Auto-MDI/MDI-X is a feature that eliminates the need for
worrying about using either a standard or crossover cable—you can
use either one—and allows any port to be an uplink port.
AC Power
The DGS-1216T can be used with AC power supply 100~240V AC,
50~60Hz. The power switch is located at the rear of the unit adjacent to
the AC power connector and the system fan. The switch’s power supply
will adjust to the local power source automatically and may be turned on
without having any or all LAN segment cables connected.
Connect The DGS-1216T Gigabit
Smart Switch To Your Network
Front Panel
10/100/1000 Base-T
Mini GBIC Ports
Twisted-Pair Ports
┌───────────────┐
┌──┐
└─────────┘
LED Indicators
Page 4 / 10
4
±
1000BASE-T Twisted Pair Ports (Port 1~16)
The DGS-1216T is equipped with 16 Gigabit twisted pair ports that are
auto negotiable 10/100/1000Mbps and also support auto MDI/MDIX
crossover detection. These two ports can operate in half- and full-
duplex modes.
±
Mini GBIC Ports (Option Port 15~16)
The Switch is equipped with two Mini GBIC ports, supported optional
1000BASE-SX/LX Mini GBIC module.
Note: When the port was set to “Forced Mode”, the Auto
MDI/MDIX will be disabled.
LED Indicators
LED
stands for
L
ight-
E
mitting
D
iode
.
The front panel LEDs provides instant status feedback and simplifies
monitoring and troubleshooting tasks.
LED indicators of the Switch
±
Power LEDs
On
When the Power LED light is on, the Switch is
receiving power.
Off
When the Power LED light is off, the power cord is
improperly connected.
±
CPU LEDs ( Management Indicator)
Blinking
When the CPU is working, the System LED is
blinking.
On/Off
The CPU is not working.
Page 5 / 10
5
±
Ports 1 & 16 Status LEDs
Link/Act
On
When the Link/Act LED lights on, the respective
port is successfully connected to an Ethernet
network.
Blinking
When the Link/Act LED is blinking, the port is
transmitting or receiving data on the Ethernet
network.
Off
No link.
1000Mbps
On
When the 1000Mbps LED lights on, the
respective port is connected to a 1000Mbps
Gigabit Ethernet network.
Off
When the respective port is connected to a
10Mbps Ethernet or 100Mbps Fast Ethernet
network.
100Mbps
On
When the 100Mbps LED lights on, the respective
port is connected to a 100Mbps Fast Ethernet
network.
Off
When the respective port is connected to a
10Mbps Ethernet or 1000Mbps Gigabit Ethernet
network.
±
Option Ports 15~16 Mini-GBIC Status LEDs
Link/Act
On
When the Mini GBIC module is installed and
connected to a network, the Link/Act LED lights on.
Blinking
When the LED is blinking, the Mini GBIC module is
receiving data on a network.
Off
No link.
1000Mbps
On
When the 1000Mbps LED lights on, the respective
port is connected to a 1000Mbps Gigabit Ethernet
network.
Off
When the respective port is disconnected to the
network

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top