1. Home
    2. /
  2. Manuals
    3. /
  3. Dell
    4. /
  4. SonicWALL TZ-150
    5. /
  5. 3
Page 11 / 37 Scroll up to view Page 6 - 10
Page 10
4.
WAN Network Mode
- The second WAN network mode screen
configures your WAN settings for the selection you made in the
previous screen.
Static IP
The
Setup Wizard
screen should display:
WAN Network Mode: NAT Enabled (Static IP)
Click
Next
.
DHCP
The
Setup Wizard
screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN
networking settings. The network settings are provisioned
automatically from a DHCP server.
Click
Next
.
SonicWALL WAN IP
Address
Enter a single, static IP address. This
must be in the address range assigned to
you by your ISP.
WAN Subnet Mask
Enter the subnet mask for your network,
provided by your ISP. For example,
255.255.255.0
.
Gateway (Router)
Address
Enter the IP address of your Internet
gateway, provided by your ISP.
DNS Server Address
Enter the IP address of the DNS server for
your network, provided by your ISP.
DNS Server Address
#2 (optional)
You can enter a secondary, back-up DNS
server to use if the first one fails.
Page 12 / 37
SonicWALL TZ 150 Getting Started Guide Page 11
PPPoE
The
Setup Wizard
screen should display:
WAN Network Mode - NAT with PPPoE Client
Click
Next
.
Obtain an IP Address
Automatically
Select this if your ISP assigns you a
dynamic IP address.
Use the following
IP Address
Select this if your ISP has assigned you a
static IP address, and enter the address.
PPPoE User Name
Enter the user name for your Internet
account. Your ISP may require you to
enter your username in e-mail address
format, including “@” and the domain
name, for example,
PPPoE Password
Enter the password for your Internet
account.
Inactivity Disconnect
(minutes)
Check this box if you want the
SonicWALL TZ 150 to disconnect from the
Internet if there is no traffic for the number
of minutes you enter.
Page 13 / 37
Page 12
PPTP
The
Setup Wizard
screen should display:
WAN Network Mode - NAT with PPTP Client
Click
Next
.
PPTP Server IP
Address
Enter the address of the PPTP server.
PPTP User Name
Enter your network user name.
PPTP Password
Enter your network password.
Obtain an IP Address
Automatically
Select this if the server assigns you a
dynamic IP address.
Use the following
IP Address
Check this if you have been given a static
IP address, and fill in the following three
fields.
SonicWALL WAN
IP Address
Enter the static IP address for your con-
nection.
WAN Subnet Mask
Enter the subnet mask for your connec-
tion.
Gateway (Router)
Address
Enter the address of your Internet Gate-
way.
Page 14 / 37
SonicWALL TZ 150 Getting Started Guide Page 13
5.
LAN Settings
- The LAN Settings screen configures your LAN
interface.
By default, your SonicWALL TZ 150 is configured with a LAN
network IP address,
192.168.168.168
, and subnet mask,
255.255.255.0
, which will work well for most installations. In most
cases, leave the default LAN IP address and subnet mask
unchanged.
Note:
The LAN IP address is the address you will use to access
the SonicWALL TZ 150 management interface.
Click
Next
.
SonicWALL LAN
IP Address
Accept the default IP address or enter a
new IP address of the LAN interface.
Record the address:
LAN Subnet Mask
Accept the default, or enter a subnet mask
for your LAN.
Enable Windows
Networking Support
Leave this option checked if you plan to
have more than one Windows computer
on your network. Windows Networking
has no effect on computers with other
operating systems.
Page 15 / 37
Page 14
6.
LAN DHCP Settings
- The LAN DHCP Settings screen allows
you to select whether or not to use the DHCP server in the
SonicWALL TZ 150 to automatically distribute IP addressing
information to computers and other network devices on your
LAN.
Click
Next
.
7.
SonicWALL Configuration Summary
- Displays your network
configuration information. Confirm that the settings displayed
match the information you collected in
Procedure 1: Collect
Required Information on page 3
.
Click
Apply
to apply your settings to the SonicWALL security
appliance. If you click
Cancel
, no settings will be applied to the
SonicWALL security appliance.
Enable DHCP Server
on LAN
Leave this checkbox checked to use the
DHCP server in the SonicWALL TZ 150
security appliance.
Do not select this option if you already
have a DHCP server on your network, or if
you want to require your network clients to
have static IP addresses.
LAN Address Range
If you enabled the DHCP Server, enter a
range of IP addresses in the same subnet
as the LAN IP address, or leave the
default range unchanged. The default
DHCP range will work for most installa-
tions.

Rate

4 / 5 based on 3 votes.

Popular Dell Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top