Corega CG-WLBARGO Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Corega

CG-WLBARGO

Page 21 / 30 Scroll up to view Page 16 - 20

WLUSB2GO

Manual

6.3 Link Status

This tab displays the information of the link status.

• Status: Displays the linked AP name and MAC address. When

[Disconnect] appears in this box, the connection is failed.

• Extra Info: link status and strength.

• Channel:Current channel in use.

• Link Speed: Show current transmit rate and receive rate.

• Throughout: Display transmits and receive throughput value.

• Link Quality: Display connection quality based on signal

strength and TX/RX packet error rate.

• Signal Strength: Receive signal strength, user can choose to

display as percentage or dBm format

• Noise Level: Display noise signal strength.

Page 22 / 30

WLUSB2GO

Manual

6.4 Statistics

Statistics page displays the detail counter information.

• Transmit Statistics: Statistic of transmitted frames .

• Receive Statistics: Statistic of received frames.

• [Reset Counters]: Click [Reset Counter] to zero the statistic

numbers of transmitting and receiving data.

6.5

Advanced settings

The advanced setting sections are shown as follows.

Page 23 / 30

WLUSB2GO

Manual

•

Wireless mode: Select wireless network mode(speed)

- 802.11b/g mixed: Automatically detect 11b or 11g

- 802.11b only: Frequency only 11b

- 802.11g only: Frequency only 11g

• 11b/g Protection: In order to keep the connection stable,

please select [Auto] to automatically conﬁrm which mode

the wireless network is in.

• TX Rate: Manually force the Transmit using selected rate.

Please accept the default setting.

• Tx-Burst: Ralink’s proprietary frame burst mode. When it is

checked, transmit throughput will be improved.(Only work

when AP support this function. eg: coreag WLBARGMO)

- Enable TCP Window Size: Extend the Window size of

TCP.(When checked, the recieve speed will improve.)

- Fast Roaming at ___ dBm: It will enter romaing mode when

dBm reaches a level.

• CCX2.0: Open CCX(supports Cisco Compatible Extensions

function). Check it when AP supports Cisco.

- LEAP turn on CCKM: Open CCKM fuction (Cisco Key Man-

agement).

- Enable Radio Measurements:Open the function of CCK

Monitor AP Channel.

- Non-Serving Channel Measurements... : Select and start to

monitor if wireless channel is non-serving.

• Radio Off: Disable wireless radio wave.

• [Apply] : Click this when ﬁnish the settings.

Page 24 / 30

WLUSB2GO

Manual

6.6

IP Information

The MAC Address and the IP information are displayed in this

tab. Click[Release] to release IP address, click [Renew] to renew IP

information.

6.7 About

The About tab displays the information of the utility version and

the driver version.

Page 25 / 30

WLUSB2GO

Manual

There are 3 ways for solving your problems if WLUSB2GO can’t

connect to Internet as below:

(1) First,

please see following “FAQ” to check your problem.

(2) Please go to http://www.corega-asia.com to download the

latest driver.

(3) Please go to http://www.corega-asia.com, then click

“Supports”=>select “Online Customer Support”

=> ﬁll in the

form, =>click “submit”

We’ll reply you as soon as possible.

• Product name: e.g.) WLUSB2GO

• Firmware version: access the management program to check.

• Your ISP service name.

• Windows system: e.g.) Windows98/2000/XP and so on.

• WEB browser(Version): e.g.) IE5.0/5.5/6.0 and so on.

• Network adapter manufacturer and its driver version.

• Connection way: ﬁxed IP, dynamic IP or PPPoE dial-up con-

nection.

• What are your problem and situation: e.g.) unable to internet.

• What is the error message or picture?

Q1.What should I do when it’s not able to connect to the Inter-

net?

A: Please make sure if the below processes are complete or not.

(1) Vertify the product is installed.

(2) Vertify the

driver and the software are conﬁgured.

(3) Vertify the network setting is correct.

(4) Vertify the security setting is correct.

(5) Vertify the ESSID setting of AP router is correspond to that of

WLUSB2GO.

(6) Vertify the channel if under Ad-Hoc mode.

(7) Vertify the wireless standard of AP is the same as WLUSB2GO.

FAQ

Rate

Popular Corega Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share