Page 16 / 30
Scroll up to view Page 11 - 15
WLUSB2GO
Manual
15
a. Authentication Type: Select [WPA-PSK] or [WPA2-PSK] (AP
must support the function).
b. Encryption: Select [TKIP] or [AES].(Same as AP)
c. Enter the selected AP’s password in [WAP Preshared Key]
box and click [OK].
《
WPA and WPA2
》
1. Select an AP with [WPA] or [WPA2] authentication and press
[Connect]. Here we use corega A02 for example, hence the fol-
lowing settings must correspond with corega A02.
2. Setting the [Authentication and Security] Page:
Page 17 / 30
WLUSB2GO
Manual
16
a. Authentication Type: select [WPA]or [WPA2-PSK] (AP must
support the function).
b. Encryption: select [TKIP] or [AES](Same as AP)
c. If the AP/router has [802.1x Setting] function, click it for
advance setting. Please consult your MIS for details.
d. Click [OK] to finish setting.
Page 18 / 30
WLUSB2GO
Manual
17
Chapter 6 will briefly introduce the sections in the setup utility.
6.1 Site Survey
1.
The discription of these sections
• SSID : Name of AP (or called ESSID).
• BSSID : Mac Address of AP
• Signal : Signal strength of AP
• Channel : AP used channel
• Encryption : what encrypted mechanism does AP used
• Authentication : What authentication mechanism does AP
used.
• Network Type : What Network Type does the AP belong to.
Generally it is [infrastruture].
2. Available WLAN list.The
icon means currently connecting.
3. [Connected] means connection ok. [Disconnected] means
connection failed.
6
Utility introduction
Page 19 / 30
WLUSB2GO
Manual
18
4. Click [Rescan] to rescan and upgrade all the AP’s information
in time
5. Click [Connect] to start connecting the selected AP.
6. Save the selected AP’s information to profile. For more details,
please refer to 6.1.1.
6.1.1 Add one profile
1. Select one AP in the SSID column, eg: corega0205=>Click [Add
to Profile] and the below page will appear.
2. Setting items in the [configuration] tab:
• Profile Name: Enter the connected AP profile, eg: PROF1.
• SSID: Click the drop-down menu and select one AP. You can
also enter the AP manually.
• PSM: When CAM is selected, indicats that the product is not
in power saving status. When PSM is selected, the product
is in power saving status. (Only select it under Infrastructure
nettype).
• Network Type:
[Infrastructure]
or [Ad Hoc] type. We recom-
Page 20 / 30
WLUSB2GO
Manual
19
mend you to select [Infrastructure].
• Transmit power:
the amount of power used by a radio trans-
ceiver to send the signal out. User can choose power value
by sliding the bar.
• [RTS Threshold] and [Fragment Threshold] : We recommend
you to use the default value 2312. User can adjust threshold
numbers by sliding the bars or key in the values directly.
3. Click [OK] and the set AP will appear in the [Profile] tab.
6.2 Profile
• [Add]:
Click [Add] to add a new profile.
• [Delete]: to delete a profile, select one profile name and click
[Delete].
• [Edit]:to edit the setting of a profile, select the profile and
click [Edit].
• [Activate]: to activate the selected profile, select the profile
and click [Activate].
19216811.live