Page 11 / 130
Scroll up to view Page 6 - 10
10
2.2 USB Driver Autorun Installation
Before connecting the NexusLink 5631 to a PC with USB, the correct drivers must be
installed.
The auto-run USB driver installation supports Win ME, Win 98, Win 2000,
Win XP (32 bit) and Vista (32 bit). For those using Windows XP 64 bit, the driver
must be installed manually (please see section 2.3 below for details).
STEP 1:
Insert the Installation CD and select
Install USB Driver
from the
autostart menu options shown below.
Follow the procedure below to install the standard (32 bit) USB driver
Page 12 / 130
11
STEP 2
: The following window will be displayed. Click the
Next
button to continue.
STEP 3:
When the window displays as below, wait for the drivers to fully install.
Page 13 / 130
12
STEP 4:
Click the
Finish
button, when the window displays as below.
STEP 5:
The installation is complete.
You can now connect the device to your PC
using a standard USB cable.
Page 14 / 130
13
2.3 USB Driver Manual Installation
(64bit OS)
Before connecting this router to a PC with USB, the correct drivers must be installed.
STEP 1:
Connect the USB port to the PC by plugging the flat connector of a
standard USB cable into your PC and plugging the square connector into
the device.
After a moment, the connection should be detected by your
PC and if so the screen will display a notice to that effect, as shown below:
Follow the procedure below to manually install the 64bit USB driver
Page 15 / 130
14
STEP 2:
When the window displays as below, select
Install from a list or
specific location (Advanced)
and then click the
Next
button.
Note
:
This window won’t display if the USB Driver has been previously installed.
In this case, contact technical support for assistance.
STEP 3
: Insert the installation CD.
Note
:
If you see the autostart menu (as shown in
step 1
of previous section)
CLICK -
and continue with the manual installation process.
19216811.live