Chapter 2 The Web Configurator

eircom F1000 Modem User’s Guide

31

NAT

Port Forwarding

Use this screen to make your local servers visible to the outside

world.

Applications

Use this screen to configure servers behind the Device.

Port Triggering

Use this screen to change your Device’s port triggering settings.

DMZ

Use this screen to configure a default server which receives packets

from ports that are not specified in the

Port Forwarding

screen.

ALG

Use this screen to enable or disable SIP ALG.

Address Mapping

Use this screen to change your Device’s address mapping settings.

Sessions

Use this screen to configure the maximum number of NAT sessions

each client host is allowed to have through the Device.

DNS

DNS Entry

Use this screen to view and configure DNS routes.

Dynamic DNS

Use this screen to allow a static hostname alias for a dynamic IP

address.

Interface

Group

Use this screen to map a port to a PVC or bridge group.

USB Service

File Sharing

Use this screen to enable file sharing via the Device.

Media Server

Use this screen to use the Device as a media server.

Printer Server

Use this screen to enable the print server on the Device and get the

model name of the associated printer.

Security Settings

Firewall

General

Use this screen to configure the security level of your firewall.

Protocol

Use this screen to add Internet services and configure firewall rules.

Access Control

Use this screen to enable specific traffic directions for network

services.

DoS

Use this screen to activate protection against Denial of Service (DoS)

attacks.

MAC Filter

Use this screen to block or allow traffic from devices of certain MAC

addresses to the Device.

Parental

Control

Use this screen to block web sites with the specific URL.

Scheduler

Rules

Use this screen to configure the days and times when a configured

restriction (such as parental control) is enforced.

Certificates

Local Certificates

Use this screen to view a summary list of certificates and manage

certificates and certification requests.

Trusted CA

Use this screen to view and manage the list of the trusted CAs.

IPSec VPN

Setup

Use this screen to add or edit VPN policies.

Monitor

Use this screen to view the status of all IPSec VPN tunnels. You can

also manually initiate a tunnel in this screen.

System Monitor

Log

System Log

Use this screen to view the status of events that occurred to the

Device. You can export or e-mail the logs.

Security Log

Use this screen to view the login record of the Device. You can export

or e-mail the logs.

Table 2

Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

Chapter 2 The Web Configurator

eircom F1000 Modem User’s Guide

32

Traffic Status

WAN

Use this screen to view the status of all network traffic going through

the WAN port of the Device.

LAN

Use this screen to view the status of all network traffic going through

the LAN ports of the Device.

NAT

Use this screen to view NAT statistics for connected hosts.

VoIP Status

Use this screen to view VoIP registration, current call statust and

phone numbers for the phone ports.

ARP Table

Use this screen to view the ARP table. It displays the IP and MAC

address of each DHCP connection.

Routing Table

Use this screen to view the routing table on the Device.

IGMP/MLD

Group Status

Use this screen to view the status of all IGMP settings on the Device.

xDSL Statistics

Use this screen to view the Device’s xDSL traffic statistics.

3G Statistics

Use this screen to look at 3G Internet connection status.

Maintenance

User Account

Use this screen to change user password on the Device.

Remote MGMT

Use this screen to enable specific traffic directions for network

services.

TR-064

Use this screen to enable management via TR-064 on the LAN.

SNMP

Use this screen to configure SNMP (Simple Network Management

Protocol) settings.

Time

Use this screen to change your Device’s time and date.

Email

Notification

Use this screen to configure up to two mail servers and sender

addresses on the Device.

Log Setting

Use this screen to change your Device’s log settings.

Firmware

Upgrade

Use this screen to upload firmware to your device.

Configuration

Use this screen to backup and restore your device’s configuration

(settings) or reset the factory default settings.

Reboot

Use this screen to reboot the Device without turning the power off.

Diagnostic

Ping &

Traceroute &

Nslookup

Use this screen to identify problems with the DSL connection. You can

use Ping, TraceRoute, or Nslookup to help you identify problems.

802.1ag

Use this screen to configure CFM (Connectivity Fault Management)

MD (maintenance domain) and MA (maintenance association),

perform connectivity tests and view test reports.

OAM Ping

Use this screen to view information to help you identify problems with

the DSL connection.

WAN Diagnostics

Tests

Use this screen to perform a test on the current WAN connection and

view the result on the screen.

Table 2

Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

33

P

ART

II

Technical Reference

34

eircom F1000 Modem User’s Guide

35

C

HAPTER

3

Status and Network Map Screens

3.1

Overview

After you log into the Web Configurator, the

Connection Status

screen appears. Use the screen to

look at the current status of the Device, system resources, and interfaces (LAN, WAN, and WLAN).

Use the

Network Map

screen to view the network connection status of the Device and clients

connected to it.

3.2

The Connection Status Screen

Use this screen to view the status of the Device. Click

Connection Status

to open this screen.

Figure 13

Connection Status Screen