1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. EMG2926-Q10A
    5. /
  5. 7
Page 31 / 236 Scroll up to view Page 26 - 30
Chapter 5 Access Point Mode
EMG2926-Q10A User’s Guide
31
5.3.1
Setting your EMG2926-Q10A to AP Mode
1
Log into the Web Configurator if you haven’t already. See the Quick start Guide for instructions on
how to do this.
2
To use your EMG2926-Q10A as an access point, go to
Maintenance > Sys OP Mode
and select
Access Point Mode
.
Figure 13
Changing to Access Point mode
Note: You have to log in to the Web Configurator again when you change modes. As soon
as you do, your EMG2926-Q10A is already in Access Point mode.
3
When you select
Access Point Mode
, the following pop-up message window appears.
Figure 14
Pop up for Access Point mode
Click
OK
. Then click
Apply
. The Web Configurator refreshes once the change to Access Point mode
is successful.
5.3.2
Accessing the Web Configurator in Access Point Mode
Log in to the Web Configurator in Access Point mode, do the following:
1
Connect your computer to the LAN port of the EMG2926-Q10A.
2
The default IP address of the EMG2926-Q10A is “192.168.1.2”. In this case, your computer must
have an IP address in the range between “192.168.1.3” and “192.168.1.254”.
3
Click
Start > Run
on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix B on page 191
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “192.168.1.2” as the web address in your web browser.
Page 32 / 236
Chapter 5 Access Point Mode
EMG2926-Q10A User’s Guide
32
5.3.3
Configuring your WLAN and Maintenance Settings
The configuration of wireless and maintenance settings in
Access Point Mode
is the same as for
Router Mode
.
•
See
Chapter 9 on page 66
for information on the configuring your wireless network.
•
See
Chapter 24 on page 164
for information on configuring your Maintenance settings.
5.4
AP Mode Status Screen
Click
to open the
Status
screen.
Figure 15
Status Screen: Access Point Mode
The following table describes the labels shown in the
Status
screen.
Table 9
Status Screen: Access Point Mode
LABEL
DESCRIPTION
Device Information
Host Name
This is the
System Name
you enter in the
Maintenance
>
General
screen. It is for
identification purposes.
Model Number
This is the model name of your device.
Page 33 / 236
Chapter 5 Access Point Mode
EMG2926-Q10A User’s Guide
33
Firmware Version
This is the firmware version and the date created.
Sys OP Mode
This is the device mode (
Section 3.1.1 on page 22
) to which the EMG2926-Q10A is set -
AP
Mode
.
LAN Information
MAC Address
This shows the LAN Ethernet adapter MAC Address of your device.
IP Address
This shows the LAN port’s IP address.
IP Subnet Mask
This shows the LAN port’s subnet mask.
DHCP
This shows the LAN port’s DHCP role -
Client
or
None
.
IPv6 Address
This shows the IPv6 address of the EMG2926-Q10A on the LAN.
WLAN 2.4G Information
WLAN OP Mode
This is the device mode (
Section 3.1.1 on page 22
) to which the EMG2926-Q10A’s wireless
LAN is set -
Access Point Mode
.
MAC Address
This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID
This shows a descriptive name used to identify the EMG2926-Q10A in the 2.4GHz wireless
LAN.
Channel
This shows the channel number which you select manually.
Security
This shows the level of wireless security the EMG2926-Q10A is using.
WLAN 5G Information
MAC Address
This shows the 5GHz wireless adapter MAC Address of your device.
SSID
This shows a descriptive name used to identify the EMG2926-Q10A in the 5GHz wireless
LAN.
Channel
This shows the channel number which you select manually.
Security
This shows the level of wireless security the EMG2926-Q10A is using.
Summary
Packet Statistics
Click
Details...
to go to the
Monitor > Packet Statistics
screen (
Section 7.5 on page 52
).
Use this screen to view port status and packet specific statistics.
WLAN 2.4G Station
Status
Click
Details...
to go to the
Monitor > WLAN 2.4G Station Status
screen (
Section 7.6 on
page 53
). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A’s 2.4GHz wireless LAN.
WLAN 5G Station Status
Click
Details...
to go to the
Monitor > WLAN 5G Station Status
screen (
Section 7.6 on
page 53
). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A’s 5GHz wireless LAN.
System Status
Item
This column shows the type of data the EMG2926-Q10A is recording.
Data
This column shows the actual data recorded by the EMG2926-Q10A.
System Up Time
This is the total time the EMG2926-Q10A has been on.
Current Date/Time
This field displays your EMG2926-Q10A’s present date and time.
System Resource
- CPU Usage
This displays what percentage of the EMG2926-Q10A’s processing ability is currently used.
When this percentage is close to 100%, the EMG2926-Q10A is running at full load, and the
throughput is not going to improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using bandwidth
management.)
- Memory Usage
This shows what percentage of the heap memory the EMG2926-Q10A is using.
Interface Status
Table 9
Status Screen: Access Point Mode (continued)
LABEL
DESCRIPTION
Page 34 / 236
Chapter 5 Access Point Mode
EMG2926-Q10A User’s Guide
34
5.4.1
Navigation Panel
Use the menu in the navigation panel to configure EMG2926-Q10A features in
Access Point
Mode
.
Figure 16
Menu: Access Point Mode
Refer to
Table 8 on page 27
for descriptions of the labels shown in the navigation panel.
5.5
LAN Screen
Use this section to configure your LAN settings while in
Access Point Mode
.
Click
Network > LAN
to see the screen below.
Note: If you change the IP address of the EMG2926-Q10A in the screen below, you will
need to log into the EMG2926-Q10A again using the new IP address.
Interface
This displays the EMG2926-Q10A port types. The port types are:
LAN
and
WLAN
.
Status
For the LAN ports, this field displays
Down
(line is down) or
Up
(line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays
Up
when the 2.4GHz/5GHz WLAN is enabled or
Down
when the 2.4G/5G WLAN is disabled.
Rate
For the LAN ports, this displays the port speed and duplex setting or
N/A
when the line is
disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and
N/A
when the WLAN is disabled.
Table 9
Status Screen: Access Point Mode (continued)
LABEL
DESCRIPTION
Page 35 / 236
Chapter 5 Access Point Mode
EMG2926-Q10A User’s Guide
35
Figure 17
Network > LAN > IP
The table below describes the labels in the screen.
Table 10
Network > LAN > IP
LABEL
DESCRIPTION
Obtain an IP Address
Automatically
When you enable this, the EMG2926-Q10A gets its IP address from the network’s
DHCP server (for example, your ISP). Users connected to the EMG2926-Q10A can
now access the network (i.e., the Internet if the IP address is given by the ISP).
The Web Configurator may no longer be accessible unless you know the IP address
assigned by the DHCP server to the EMG2926-Q10A. You need to reset the
EMG2926-Q10A to be able to access the Web Configurator again (see
Section 24.7
on page 169
for details on how to reset the EMG2926-Q10A).
Also when you select this, you cannot enter an IP address for your EMG2926-Q10A
in the field below.
Static IP Address
Click this if you want to specify the IP address of your EMG2926-Q10A. Or if your
ISP or network administrator gave you a static IP address to access the network or
the Internet.
IP Address
Type the IP address in dotted decimal notation. The default setting is 192.168.1.2.
If you change the IP address you will have to log in again with the new IP address.
Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your
EMG2926-Q10A will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the EMG2926-Q10A.
Gateway IP Address
Enter a
Gateway IP Address
(if your ISP or network administrator gave you one)
in this field.
DNS Assignment

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top