AMG1302/AMG1202-TSeries User’s Guide

21

C

HAPTER

2

Introducing the Web Configurator

2.1

Overview

The web configurator is an HTML-based management interface that allows easy device setup and

management via Internet browser. Use Internet Explorer 6.0 and later versions, Mozilla Firefox 3

and later versions, or Safari 2.0 and later versions. The recommended screen resolution is 1024 by

768 pixels.

In order to use the web configurator, you need to allow:

•

Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in

Windows XP SP (Service Pack) 2.

•

JavaScript (enabled by default).

•

Java permissions (enabled by default).

See

Appendix C on page 273

if you need to make sure these functions are allowed in Internet

Explorer.

2.1.1

Accessing the Web Configurator

1

Make sure your AMG1302/AMG1202-TSeries hardware is properly connected (refer to the Quick

Start Guide).

2

Launch your web browser.

3

Type "192.168.1.1" as the URL.

4

A password screen displays. Type “admin” (default) as the username and “1234” as the password,

and click

Login

. If you have changed the password, enter your password and click

Login

.

Figure 4

Password Screen

Chapter 2 Introducing the Web Configurator

AMG1302/AMG1202-TSeries User’s Guide

22

Note: For security reasons, the AMG1302/AMG1202-TSeries automatically logs you out if

you do not use the web configurator for five minutes (default). If this happens, log

in again.

5

The following screen displays if you have not yet changed your password. It is strongly

recommended you change the default password. Enter a new password, retype it to confirm and

click

Apply

; alternatively click

Skip

to proceed to the Connection Status screen if you do not want

to change the password now.

Figure 5

Change Password Screen

6

The

Connection Status

screen appears.

Figure 6

Connection Status

7

Click

System Info

to display the

System Info

screen, where you can view the AMG1302/

AMG1202-TSeries’s interface and system information.

Chapter 2 Introducing the Web Configurator

AMG1302/AMG1202-TSeries User’s Guide

23

2.2

The Web Configurator Layout

Click

Connection Status > System Info

to

show the following screen.

Figure 7

Web Configurator Layout Screen

A

B

C

Chapter 2 Introducing the Web Configurator

AMG1302/AMG1202-TSeries User’s Guide

24

As illustrated above, the main screen is divided into these parts:

•

A

- title bar

•

B

- main window

•

C

- navigation panel

2.2.1

Title Bar

The title bar shows the following icon in the upper right corner.

Click this icon to log out of the web configurator.

Chapter 2 Introducing the Web Configurator

AMG1302/AMG1202-TSeries User’s Guide

25

2.2.2

Main Window

The main window displays information and configuration fields. It is discussed in the rest of this

document.

After you click

System Info

on the

Connection Status

screen, the

System Info

screen is

displayed. See

Chapter 5 on page 68

for more information about the

System Info

screen.

If you click

LAN Device

on the

System Info

screen, the

Connection Status

screen appears. See

Chapter 5 on page 67

for more information about the

Connection Status

screen.

If you click

Virtual Device

on the

System Info

screen, a visual graphic appears, showing the

connection status of the AMG1302/AMG1202-TSeries’s ports. The connected ports are in color and

disconnected ports are gray.

2.2.3

Navigation Panel

Use the menu items on the navigation panel to open screens to configure AMG1302/AMG1202-

TSeries features. The following table describes each menu item.

Table 2

Navigation Panel Summary

LINK

TAB

FUNCTION

Connection Status

This screen shows the network status of the AMG1302/AMG1202-

TSeries and computers/devices connected to it.

Network Setting

Broadband

Internet

Connection

Use this screen to configure ISP parameters, WAN IP address

assignment, DNS servers and other advanced properties.

More Connections

Use this screen to configure additional WAN connections.

Wireless

General

Use this screen to turn the wireless connection on or off, specify

the SSID(s) and configure the wireless LAN settings and WLAN

authentication/security settings.

More AP

Use this screen to configure multiple BSSs on the AMG1302/

AMG1202-TSeries.

MAC

Authentication

Use this screen to block or allow wireless traffic from wireless

devices of certain SSIDs and MAC addresses to the AMG1302/

AMG1202-TSeries.

WPS

Use this screen to use WPS (Wi-Fi Protected Setup) to establish a

wireless connection.

WDS

Use this screen to set up Wireless Distribution System (WDS) links

to other access points.

WMM

Use this screen to enable or disable Wi-Fi MultiMedia (WMM).

Scheduling

Use this screen to configure when the AMG1302/AMG1202-

TSeries enables or disables the wireless LAN.

Advanced

Use this screen to configure advanced wireless settings such as

output power.