1. Home
  2. /
  3. Manuals
  4. /
  5. ZTE
  6. /
  7. F660
  8. /
  9. 4
Page 16 / 30 Scroll up to view Page 11 - 15
ZXHN F660 Product Description
14
ZTE Confidential & Proprietary
4.1.5
Optical Link Monitoring and Diagnosis
The optical module diagnostic monitoring interface monitors the parameters
including operating temperature of the optical module, supply voltage, bias current,
transmission power, receiving power, etc.
ONT long-time light emitting detection and auto shutdown.
Turn on or off the power supply of the optical transmitter under the control of the
OLT.
4.2
Wi-Fi Function
The Wi-Fi function provides an easy, convenient, flexible, and low-cost method for the
users to access the internet via the wireless LAN network. The Wi-Fi function complies
with IEEE802.11n (2x2) and offers a maximum PHY layer link rate of 300 Mb/s.
Frequency: 2.4 GHz
IEEE802.11b, IEEE802.11g, and IEEE802.11n compliant
Auto and manual channel selection
Auto and manual rate control
Transmission power control
Four SSIDs
Maximum 32 users
SSID broadcast enabling/disabling function
Access control based on MAC address
Shared key authentication and 128-bit WEP authentication
WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK and WPA2-Enterprise security
authentication
Page 17 / 30
ZXHN F660 Product Description
ZTE Confidential & Proprietary
15
WPS
WMM
Maximum TX power up to 100mW
Two External antennas
4.3
VoIP Function
SIP and H.248 compliant
Support in-band DTMF tone sending/receiving and out-band DTMF signaling
with RTP, as per RFC2833
32ms echo cancellation
G.711 a/u law, G.729, and G.722 coding/encoding algorithm
Voice Activity Detectors (VAD) and Comfort Noise Generation (CNG)
T.30 fax: fax transparent transmission (uncontrolled, RTCP control, and SS control)
T.38 fax
Supplementary services: caller ID display, call waiting, call forwarding, call transfer,
three way calling, etc
4.4
USB Function
One USB host interface
Full-speed and high-speed USB 2.0 interface
USB fast file backup, fast recovery.
Page 18 / 30
ZXHN F660 Product Description
16
ZTE Confidential & Proprietary
4.5
Data Forwarding Function
4.5.1
MAC Address Function
MAC address learning
MAC address aging
MAC address learning enable/disable
MAC address learning limit
MAC address binding to a user port. Only controls the input side of the port.
Anti-MAC transferring (spoofing)
Forbids the MAC addresses learned from a user port to be transferred to other
user port before aging.
Forbids the MAC addresses learned from uplink port to be transferred to the
user port.
MAC filtering
Both the source and destination MAC addresses support the blacklist and the
whitelist function.
4.5.2
VLAN Function
IEEE 802.1q VLAN with the VLAN ID from 1 to 4094
VLAN tagging/untagging on the user port
VLAN overwrite function on the user port
1:1 mapping between the user port (physical port or logical port) and VLAN
VLAN-based data forwarding
VLAN-based packet filtering
Page 19 / 30
ZXHN F660 Product Description
ZTE Confidential & Proprietary
17
VLAN untagged mode, tagged mode and double tagged mode
VLAN tag
Adds S-Tag to the untagged or priority tagged frames from the user port as per
the needs.
Adds C-Tag and S-Tag to the untagged or priority tagged frames from the user
port as per the needs.
4.6
QoS Function
Service flow rate limit based on the user port, service flow, and GEM port
Upstream service flow classification based on the physical port and source MAC
address, destination MAC address, VLAN ID, VLAN priority level (IEEE802.1D),
Ethernet type (such as IP, PPPoE, ARP/RARP), destination IP address, source IP
address, IP protocol type (TCP, UDP, ICMP, IGMP), IP DSCP, and TCP/UDP
Ethernet priority level tagging of the upstream services based on the DSCP value
Ingress rate limit
Egress shaping
4.7
Multicast Function
IGMP v1/v2 Snooping
Multicast group per LAN port is 256
Fast leave time, which is the time since user terminal sends an IGMP leave
message to the ONU equipment stops the multicast data packet, is less than 20ms.
Support MVLAN
Page 20 / 30
ZXHN F660 Product Description
18
ZTE Confidential & Proprietary
4.8
L3 Function
Data forwarding and routing
Bridging, routing, or hybrid mode (bridging and routing)
Static routing
RIP v1/v2 dynamic routing
Address management
DHCP Server/Client
PPPoE Client/Pass Through
DNS Client/Relay
SNTP client
NAT
ALG function: achieves H.323, SIP, FTP, SNMP, SMTP, Netmeeting, PPTP, L2TP,
IPSec, RTSP private network traversal function; provides separate switches for
each ALG function.
4.9
IPv6 Function
IPv6 protocol packets transparent transmission
IPv4/IPv6 Dual Stack (Only support Internet and IPTV application, but not support
VoIP and TR069 application.)
IGMP protocol packets transparent transmission
MLD v1 and MLD snooping
IPv6 DS-Lite

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top