15xx-A1 Family Router Users Guide

31

Chapter 4 Quick Setup

The Automatic Configuration feature will automatically detect the first usable PVC and

automatically detect PPPoE, PPPoA, and Bridge Protocol (with DHCP Server available). To use

the Automatic Configuration feature you check the

Automatic Configuration

option.

Note

: In order for the automatic configuration to work, all previously defined WAN configurations must

be removed.

Quick Setup with Automatic Configuration

To enable the Automatic Configuration feature:

1.

From the navigation pane on the left select

Quick Setup

.

2.

Select

Automatic Configuration

.

65xx-A1 Family Router Users Guide

32

3.

Enter the SSID.(6518/6519 only)

4.

Click

Apply/Save

.

You will see a progress screen

When the connection is complete you will see the Service Setup summary screen.

Quick Setup with Automatic Configuration Disabled

1.

From the navigation pane on the left select

Quick Setup

.

65xx-A1 Family Router Users Guide

33

2.

Specify the

VPI

and

VCI

as directed by your ISP.

3.

Select the

Encapsulation Mode

as directed by your ISP.

4.

Under

WAN Service Configuration

select the protocol for the WAN connection from the

Protocol

dropdown as directed by your ISP.

Depending on the protocol selected further parameters are presented. For example, if you

selected PPPoE or PPPoA, the

PPP Username

and

Password

option appears.

PPPoE

and

PPPoA

:

You will need to enter the PPP username and password as provided

by your ISP.

65xx-A1 Family Router Users Guide

34

For PPPoE, if desired, the DSL Router can be configured with a static IP address and

Subnet Mask for the LAN interface to correspond to your LAN’s IP Subnet. To use a

static IP address check the Use Static IP Address option, then enter the

IP Address

,

Subnet Mask

, Default

Gateway

and

DNS

server.

65xx-A1 Family Router Users Guide

35