Package Contents

In addition to this document, your package should arrive containing the following:

•

6219-X1 ADSL 2+ 4 port router

•

12V 1 A power adapter

•

RJ-11 telephone cable

•

RJ-45 Ethernet cable

•

User Manual / Quick Guide

Safety Instructions

Place your modem on a flat surface close to the cables in a location with sufficient ventilation.

To prevent overheating, do not obstruct the ventilation openings of the device.

Plug the device into a surge protector to reduce the risk of damage from power surges and

lightning strikes.

Operate this equipment only from an electrical outlet with the correct power source as indicated

on the adapter.

Do not open the cover of the device. Opening the cover will void any warranties on the

equipment.

Do not use another power adapter except for the one which accompanies the unit.

Unplug equipment first before cleaning. A damp cloth can be used to clean the equipment. Do not

use liquid / aerosol cleaners or magnetic / static cleaning devices.

6219-X1 Router Users Guide

16

Downloaded from

www.Manualslib.com

manuals search engine

Front Panel

LED

Mode

INDICATION

Solid

green

Boot-up successful

Solid red

Router is booting up or there is problem with internal Power On Self

Test (POST )diagnostic

Power

No light

The router may not be turned on. Check if the power adapter is

connected to the modem and plugged in

Solid

DSL is not connected

Alarm

No light

DSL is linked successfully

Solid on

green

Ethernet interface is successfully connected to a device through the

LAN port

Flashing

The router is sending or receiving data over Ethernet

LAN 1-4

Off

No LAN Link

Solid

Wireless access point option is enabled

No light

Wireless access point

is disabled

WIFI

Blinking

Wireless traffic activity

Solid

Connection established. The router is able to communicate with your

ISP via ADSL

DSL

Flashing

The router is attempting to connect to your ISP

Solid

ADSL is connected

No light

ADSL is not connected. The ALARM LED will be red

Internet

Blinking

The router is connected to the LAN

6219-X1 Router Users Guide

17

Downloaded from

www.Manualslib.com

manuals search engine

Back Panel

NOTE:

The below port descriptions are listed as they appear on the back panel from left to right.

Port

Description

Phone

RJ-11 cable connects to telephone (no external splitter necessary;

unit has internal splitter).

Line

RJ-11 cable connects between telephone and the LINE port using a

splitter (not included) if needed.

LAN1 – LAN4

RJ-45 connects the unit to an Ethernet device such as a PC or a

switch.

Reset / Default

Restart

—press the button for less than 4 seconds.

Default settings

—press the button for 4 seconds or longer.

Warning :

pressing the RESET button may erase the

configuration your service provider has loaded in the

modem and may cause service disruption.

Power

Connects to a 12V 1A power adapter.

6219-X1 Router Users Guide

18

Downloaded from

www.Manualslib.com

manuals search engine

Chapter 2

Hardware Installation and PC Setup

Overview

This chapter provides basic instructions for connecting the router to a computer or a LAN and to

the Internet using DSL. The first part provides instructions to set up the hardware, and the second

part describes how to prepare your PC for use with the router. Refer to Chapter 3, Using the Web

Interface for configuration instructions.

It is assumed that you have already subscribed to DSL service with your telephone company or

other Internet service provider (ISP).

Connecting your hardware

Shut down your PC before connecting the router. To connect your modem:

1.

Connect the ADSL Line and Telephone

Connect one end of an RJ-11 cable from your ADSL connection and the other end to the

LINE port of the modem.

Use a second RJ-11 cable to connect between a telephone and the PHONE port of the

modem.

2.

Connect the PC to the Router

To use the Ethernet connection, connect the Ethernet cable from the computer directly to the

router. Connect one end of the Ethernet cable to one of the four ports labelled LAN on the

back of the router and attach the other end to the Ethernet port of your computer.

3.

Connect the Power Adapter

Complete the process by connecting the AC power adapter to the POWER connector on the

back of the device and plug the adapter into a wall outlet or power strip. Then turn on and

boot up your PC and any LAN devices, such as hubs or switches, and any computers

connected to them.

6219-X1 Router Users Guide

19

Downloaded from

www.Manualslib.com

manuals search engine

Mounting the Router

The router can be mounted on the wall with two screws. Mounting can be done on wall material

including concrete, wood, or drywall. Select an appropriate location free from obstructions or any

possible interference. Make sure the cables can be easily attached to the router without strain.

The illustration below shows how to mount the router horizontally on a wall.

Standing the Router Vertically

The router can be set vertically on the desktop or other surface. On the right side of the unit as it

sits horizontally is a foot which can be rotated.

6219-X1 Router Users Guide

20

Downloaded from

www.Manualslib.com

manuals search engine