Page 36 / 107 Scroll up to view Page 31 - 35
Connection Type | PPPoE
Point to Point Protocol over Ethernet (PPPoE) encapsulates PPP frames in Ethernet frames.
1.
Select the type of network protocol and encapsulation mode over the ATM PVC that your
ISP has instructed you to use, then click
Next
2.
In the Connection Type page, select
PPP over Ethernet (PPPoE)
, then click
Next
3.
In the
PPP Username and Password
page, enter a username and password and change
other parameters as directed by your ISP, and then click
Next
.
6219-X1 Router Users Guide
36
Downloaded from
www.Manualslib.com
manuals search engine
Page 37 / 107
4.
In the
Network Address Translation Settings
page, make changes as directed by your
ISP, and then click
Next
.
When the settings are complete, the next screen shows a
WAN Setup – Summary
screen
displaying the WAN configurations made.
6219-X1 Router Users Guide
37
Downloaded from
www.Manualslib.com
manuals search engine
Page 38 / 107
5.
Make sure that the settings on the
WAN Setup - Summary
screen match the settings
provided by your ISP. If all settings are correct, click
Save
to save these settings; if not, click
Back
to make any modifications. If you want to change any item after saving, click
Edit
to
make any modifications.
6.
Click
Save
to save the settings.
After the settings are saved, the below screen will follow displaying the WAN settings that
you made with the option to
Add
or
Remove
any of the connections that you have made.
6219-X1 Router Users Guide
38
Downloaded from
www.Manualslib.com
manuals search engine
Page 39 / 107
Connection Type | MAC Encapsulation Routing
MAC Encapsulation Routing (MER) allows the router to have routing on the LAN, but have
bridging on the WAN connection to the ISP.
1.
Select the type of network protocol and encapsulation mode over the ATM PVC that your
ISP has instructed you to use, then click
Next
2.
In the Connection Type page, select
MAC Encapsulation Routing (MER)
, then click
Next
3.
In the
WAN IP Settings
page, change parameters as directed by your ISP, and then click
Next
.
6219-X1 Router Users Guide
39
Downloaded from
www.Manualslib.com
manuals search engine
Page 40 / 107
4.
In the
Network Address Translation Settings
page, make changes as directed by your
ISP, and then click
Next
.
When the settings are complete, the next screen shows a
WAN Setup – Summary
screen
displaying the WAN configurations made.
5.
Make sure that the settings on the
WAN Setup - Summary
screen match the settings
provided by your ISP. If all settings are correct, click
Save
to save these settings; if not, click
Back
to make any modifications. If you want to change any item after saving, click
Edit
to
make any modifications.
6.
Click
Save
to save the settings.
After the settings are saved, the below screen will follow displaying the WAN settings that
you made with the option to
Add
or
Remove
any of the connections that you have made.
6219-X1 Router Users Guide
40
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top