Notes:

Don’t insert phone cable into LAN ports.

Connect to Phone

Connect phone cable to

or

port of MODEM.

Connect Power Adapter

Connect the included power adapter to the MODEM power port, and then plug the power adapter into an

electrical outlet. The Power LED on the front panel will light up when the adapter is connected properly.

Notes:

Make sure you use the power supply that is supplied with the MODEM. Use of a different power

adapter/supply could damage the MODEM.

Power on MODEM

You can turn on modem by connecting power cable.

C h a p t e r

4

Preparation for Configuring MODEM

Usually, MODEM has been configured by service provider and you can use it directly. But in some

instance, you need to configure MODEM by yourself.

TCP IP Installation

If TCP/IP protocol is not installed in PC or Laptop, please install it first. Please refer to installation steps

in Windows XP as follows (For classic start menu):

1. Select

Start > Settings > Control Panel > Network Connections

.

2. Double-click

Local Area Connection

and click

Properties

.

3. Click

Install...

and double-click

Protocol

.

4. Select

Internet Protocol (TCP/IP)

and click

OK

.

TCP IP Configuration

For classic start menu:

1. Click

Start

and select

Settings

, then click

Network Connections

.

2. Double-click

Local Area Connection

and click

Properties

.

3. Double-click

Internet Protocol (TCP/IP)

and select

Obtain an IP address automatically

,

Obtain

DNS server address automatically

.

Notes:

If the service provider provides DNS IP address, please select

Use the following DNS server

addresses

and enter the specified IP address.

Checking

Check LAN Connection

1. Click

Start

and

Run

In the Open field, enter

command

. Press the

Enter key

or click the

OK

button.

In the command prompt, type ping

192.168.1.1

and press the

Enter

key.

2. If you get a reply as follows, the LAN connection is ok.

3. If you get a reply as follows, please check the LAN and TCP/IP configuration Refer to chapter 3.2 and

chapter 4.1 in detail.

Cancel Proxy Server in Browser

For classic start menu:

1. Select

Start > Settings > Control Panel > Internet Options

.

2. Select

Connections

.

3. Click the

LAN Settings

button and remove anything that is checked.

4. Click the

Cancel

button to go back to the previous screen.

5. Click the

OK

button to confirm canceling proxy server in browser.

Others

Sometimes you also need several parameters, please ask your service provider in detail.

C

C h a p t e r

5

Ordinary Operation

Login

1. To access the Web-based Utility of the MODEM, launch Internet browser (Internet Explorer or Mozila

Fire Fox) and enter the MODEM’s default IP address (

192.168.1.1

) in the address field

，

then press

the Enter

key.

2. A screen will appear asking you for your

User name

and

Password

(detail as following picture). Enter

user

in the

Username

field and

user

in the

Password

field. Select the proper language. Then click

the

login

button.

Notes:

If you click

exit

button, you will see the following prompt message. To which option, need to click.

Either on Yes or No.