Manual Ver1.0

- 41 -

Figure 46. Advanced Setup - Access Control – Passwords

5.10 - IPSec

The M404/M405 also has the ability to create a VPN (Virtual Private Network) tunnel

using IPSec as the security measure. VPN allows user to remotely connect to a network

using their Broadband connection. Please refer to your ISP and Network Administrator for

detail settings regarding VPN IPSec.

Figure 47. Advanced Setup – IPSec

Manual Ver1.0

- 42 -

Click the “Add” button create a new VPN connection

Figure 48. Advanced Setup – IPSec Add

5.11 - Certificate

This page allows user to authenticate their VPN session using certificate. Some VPN

network requires this. There are two sections: Local and Trusted CA.

LOCAL

option: A maximum of 4 certificates are supported. You can either import or send a

request for certificates.

Manual Ver1.0

- 43 -

Figure 49. Advanced Setup - Certificates

Figure 50. Advanced Setup – Local – Create Certificate

Figure 51. Advance Setup – Certificates – Local Import

Trusted CA

option: This is used to verify peer certificates. Please click on “Import

Certificate” to proceed.

Manual Ver1.0

- 44 -

Figure 52. Advanced Setup – Certificates- Trusted CA

Figure 53. Advanced Setup – Certificates - Trusted CA – Import Certificate

Manual Ver1.0

- 45 -

6. Management Utilities

6.1 - Backup Settings

System Administrator can do the M404/M405 settings backup, update, and restore default

here. The settings can be saved from M404/M405 to PC. The saved setting file can also be

loaded from PC to M404/M405. These 2 functions can help the system administrator to

manage large amount of M404/M405 efficiently. Restore Default would set the

M404/M405 with the factory default configuration.

To backup the current configurations, click on “Backup Settings”, and a File Download

window will pop up.

Figure 54. Management Utilities – Backup Settings

Click on “Save” and select the destination of the backup file (backupsettings.cfg) in your

local PC. Click on “Save” again to save your backup file.