Page 21 / 208 Scroll up to view Page 16 - 20
20
YOUR GATEWAY
02
/ CONNECTING
If connecting a wireless device:
Access the Wi-Fi setting on your wireless device, then select your
new Gateway using the wireless network name (ESSID) shown on
the sticker located on the side of your Gateway.
Enter the wireless password (WPA2 key) also shown on the sticker.
2.0c/
STEP 3 - CONFIGURE YOUR GATEWAY:
1.
Open a web browser on the device connected to your
Gateway network.
2.
In the browser address field (URL), enter:
myfiosgateway.com
, then press the
Enter
key on your
keyboard.
Alternately, you can enter:
Default login credentials
Please note: password letters are all lower-case
Wireless network name (ESSID)
Wireless password (WPA2)
Administrator password
Administration URL
www.verizon.com/quickguides
Online tutorials :
To reboot, press and hold the WPS button for 10 seconds.
XXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXX
myfiosgateway.com
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
Page 22 / 208
The first time you access your Gateway, an Easy Setup
Wizard displays to help step you through the setup process.
3.
Click the
Get Started
button. The Gateway Login screen
displays.
SETTING UP
YOUR GATEWAY
Page 23 / 208
22
YOUR GATEWAY
02
/ CONNECTING
4.
In the
Admin Password
field, enter the password that is
printed next to the Administrator Password on the label on
the side of your Gateway.
5.
Click
Next
. The Personalize your Gateway screen displays.
Default login credentials
Please note: password letters are all lower-case
Wireless network name (ESSID)
Wireless password (WPA2)
Administrator password
Administration URL
www.verizon.com/quickguides
Online tutorials :
To reboot, press and hold the WPS button for 10 seconds.
XXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXX
myfiosgateway.com
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
Page 24 / 208
For your protection, your Gateway is pre-set at the factory
to use WPA2/WPA mixed mode (Wi-Fi Protected Access)
encryption for your wireless network. This is the best setting
for most users and provides maximum security.
6.
Click
Next
to continue and save the Admin and Wi-Fi changes
to your Gateway.
Important:
If you are on a Wi-Fi device when setting up your
Gateway, you will be disconnected from the Wi-Fi network when
you change the Wi-Fi name or Wi-Fi password. When this occurs,
your Gateway will detect this situation and prompt you to
reconnect using the new settings.
7.
Print your settings. Once you have personalized your
Gateway settings, you will be prompted to print a record of
these settings in case you forget them.
SETTING UP YOUR GATEWAY AND
COMPUTER NETWORK CONFIGURATION
Page 25 / 208
24
YOUR GATEWAY
02
/ CONNECTING
8.
Click
Next
to continue. Your Gateway verifies the final
settings and displays that it is successfully connected to the
Internet and is ready for use.
Upon the successful completion of setup, the Main screen of the
Gateway displays. Your Gateway is now configured. You can change any
of the Gateway settings after this initial log in.
If your Gateway is subsequently reset to the factory default settings,
the settings printed on the label will again be in effect.
If your Gateway fails to connect, follow the troubleshooting steps in
the
Troubleshooting
section of this guide.
2.1/
COMPUTER NETWORK CONFIGURATION
Each network interface on your computer should either automatically
obtain an IP address from the upstream Network DHCP server (default
configuration) or be manually configured with a statically defined IP
address and DNS address. We recommend leaving this setting as is.
2.1a/
CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1.
In the Control Panel, locate
Network and Internet
, then
select
View Network Status and Tasks
.
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top